Hello again! I'm back home and I still have the issue with my onboard RTL8168 NIC I've described here: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=0+0+archive/2008/freebsd- hardware/20080817.freebsd-hardware
As I wrote you in one of my old mails I've tested 7.0-RELEASE and 7.0-STABLE-200807 and my NIC isn't recognised by both kernel versions. So I also would like to try more current 7.0-STABLE-200808 but there's still no new snapshot for the amd64 architecture on your ftp server: ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/200808/ Are there no relevant changes done to amd64? BTW: Bernt wrote in his mail (see below) that he has a similar motherboard also with a RTL8168/8111 PCI-E Gigabit Ethernet NIC with revision 1 (my NIC is revision 2 - see below) and his one is recognized by 7.0-RELEASE. In 7.0-STABLE it also doesn't work with his NIC: http://lists.freebsd.org/pipermail/freebsd-hardware/2008-September/005367.html (How) Can I help you to solve this issue? Regards, Lukas On Wednesday 13 August 2008 23:19:44 Lukas Razik wrote: > Hello Bernt! > > Yes, you're right - that's interesting... > I only can state that with 7.0-RELEASE and with 7.0-STABLE-200807 > (07/15/08) it doesn't work. > _But_ on 2008-07-15 there was a change made to the re driver which is > relevant for the RTL8168 as you can see here: > http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/re/if_re.c > > Maybe with the current if_re.c it works and to test this I could build a > new kernel from CVS but I come home not until September. :-( > > The only difference between our NICs which I see is the revision. Since > the revision of your chip is 0x01, the NIC's revision on my MoBo is 0x02 > ... Maybe that's the difference? > > Thanks for your statement! > > Regards, > Lukas > > Bernt Hansson schrieb: > > Lukas Razik: > >>Hello! > >> > >>I've a GigaByte GA-X48-DQ6 Motherboard with a "RTL8168/8111 PCI-E Gigabit > >>Ethernet NIC" and I've read that 7.0-RELEASE / amd64 should recognize > >> these cards (by the "re" driver) but it doesn't in my case. > > > > I got an Gigabyte GA-MA790FX-DS5 with the same network chip and it's > > working right out of the box. There are other issues with that > > motherboard. > > > > 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008 > > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC amd64 > > > > > > [EMAIL PROTECTED]:2:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec > > rev=0x01 > > hdr=0x00 > > vendor = 'Realtek Semiconductor' > > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' > > class = network > > subclass = ethernet > > > >>#uname -a : > >>FreeBSD 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008 > >>[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC amd64 > >> > >>#pciconf -lv : > >>[...] > >>[EMAIL PROTECTED]:4:0:0: class=0x020000 card=0xe0001458 > >>chip=0x816810ec > >>rev=0x02 hdr=0x00 > >> vendor = 'Realtek Semiconductor' > >> device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' > >> class = network > >> subclass = ethernet > >>[...] > >> > >>So, does FreeBSD 7.0 work with these NICs or am I out of luck? > >> > >>Regards and Many Thanks for your help! > >>Lukas > >> > >>_______________________________________________ > >>[email protected] mailing list > >>http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > >>To unsubscribe, send any mail to > >> "[EMAIL PROTECTED]" > > > > _______________________________________________ > > [email protected] mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > > To unsubscribe, send any mail to > > "[EMAIL PROTECTED]" > > _______________________________________________ > [email protected] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to "[EMAIL PROTECTED]" _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"
