Στις Tuesday 05 July 2011 11:41:38 γράψατε: > 2011-07-04 12:39, Achilleas Mantzios skrev: > > Hello, sorry for the cross-post but i believe this question might seat in > > both lists. > > I am the guy who had the done the old 1.23.3 zoneminder port some years > > ago, and i am thinking of installing/testing > > the new 1.24.4 port, submitted by [email protected]. > > Besides the basic functions, i am thinking of re-using some old techniques > > by which i controlled > > the home alarm via a NC/NO circuit (basically it was an enhanced door > > contact), > > driven by an old zyXel modem, which in turn was driven by a small perl > > program driving the com port, and > > which was called by a deamon reading zoneminder shared memory info directly. > > That way i could trigger the alarm system getting into alarm state, > > whenever zoneminder detected motion, > > in a fully controlled and programmatic way. > > Is this what you you are looking for > > http://www.telldus.se/products/tellstick >
No, what i am looking for is for a way to control a NO or NC/EOL switch from FreeBSD. Most probably it must be some kind of relay. I have not used any ever, except once using a zyXel modem to behave like a relay switch in a N/C contact. -- Achilleas Mantzios _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[email protected]"
