Hey, its a small world! i am the other guy (achix) from the zoneminder camp :) this all has to do with a continuation of the zoneminder work, zoneminder driving a relay, driving a xmitter and finally triggering an alarm to the central alarm control panel.
i have done this in the past with a rather "legacy" way (utilizing a zyXel modem), but wanted to do something more fancy. Στις Tuesday 05 July 2011 22:56:28 ο/η Boris Samorodov έγραψε: > On Tue, 5 Jul 2011 17:30:03 +0300 Achilleas Mantzios wrote: > > > Most probably i'll go for something cheaper like this one > > http://www.ebay.co.uk/itm/USB-Eight-Channel-Relay-Board-RS232-Serial-Controlled-/110710346488?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item19c6d9d2f8 > > > Could i use the ucom driver to talk to the USB device like a normal > > serial device, via /dev/cua*** ? > > I use USB-to-7-RS232-ports devices via /dev/cuaU00-/dev/cuaU06. > Works like a charm. But you should find out what chip is used > for USB-to-RS232 bridge and (kld)load a driver. > Is there any big probability for the chip to not be on of those that FreeBSD supports (uark, uftdi, etc..) ? most sellers hardly give such info out. > > The above link says one needs to talk to the relay with: > > 8 Data, 1 Stop, No Parity,Baud rate : 9600 > > I've never changed those parameters. > > > and the commands look like: > > FF 01 00 (HEX) > > or > > 255 1 0 (DEC) > > > could i be able to specify those over ucom? > > do you know any application, perl library, utility or just a guide for > > standard C serial port programming? > > > i have used mgetty/vgetty in the past to control some modems. > > I do not know if there any fancier methods to access the serial port, > > but this is how i used to do it, back in 7.* > > /usr/local/bin/vm shell -l cuad1 -S onhook_offhook.pl > > where onhook_offhook.pl reads like: > > #!/usr/bin/perl > > # > > use Modem::Vgetty; > > > my $v = new Modem::Vgetty; > > > $v->device('DIALUP_LINE'); > > $v->send("ATH1"); > > sleep(5); > > $v->send("ATH0"); > > > if i could speak directly with e.g. "255 1 0" like > > $v->send("255 1 0"); > > that would be awesome... > > i guess i will have to try it out. > > I use python for scripting and it is as simple as write(data) and > read(data). > Cool, thanx, see you over the zoneminder forum. -- Achilleas Mantzios _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[email protected]"
