On Fri, Sep 04, 2009 at 02:22:23PM -0700, Pyun YongHyeon wrote:
>
> Would you back out previous changes and apply the patch at the
> following URL?
> http://people.freebsd.org/~yongari/msk/msk.DGE560.diff2
>
> Note, I have no more access to msk(4) hardwares so it wasn't tested
> at all except compilation.
>
Still no success.
mskc0: <D-Link 560SX Gigabit Ethernet> port 0xd800-0xd8ff mem
0xfeafc000-0xfeafffff irq 16 at device 0.0 on pci1
msk0: <Marvell Technology Group Ltd. Yukon XL Id 0xb3 Rev 0x03> on mskc0
msk0: Ethernet address: 00:21:91:52:4f:09
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1112 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 1000baseSX, 1000baseSX-FDX, auto
mskc0: [FILTER]
ifconfig -m msk0
msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4>
capabilities=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4>
ether 00:21:91:52:4f:09
inet 10.2.3.1 netmask 0xffffff00 broadcast 10.2.3.255
media: Ethernet autoselect (autoselect <full-duplex>)
status: active
supported media:
media autoselect
media 1000baseSX mediaopt full-duplex
media 1000baseSX
media none
Switch shows no link on the port.
# ifconfig msk0 media 1000baseSX mediaopt full-duplex
# ifconfig msk0
msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4>
ether 00:21:91:52:4f:09
inet 10.2.3.1 netmask 0xffffff00 broadcast 10.2.3.255
media: Ethernet 1000baseSX <full-duplex> (autoselect <full-duplex>)
status: active
Switch shows no link again.
All dev.msk.0.stats counters are zero even after trying broadcast ping.
I can arrange you root access to the host with this NIC if you have time/wish.
--
Eugene Perevyazko
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
