On Saturday, October 15, 2005 11:15:26 AM, Philip Keuleers <[EMAIL PROTECTED]>
Subject: bizar problem with a Dell latitude D600's onboard nic
Wrote these words of wisdom:

> Hi,
> 
> I'm looking for some help with a problem I've been having with a Dell 
> D600 with a FreeBSD 5.2.1 install. A while ago I started getting network 
> timeouts. In my message logs I found entries like this:
> 
> Oct 10 14:35:04 loki kernel: bge0: PHY read timed out
> Oct 10 14:35:04 loki last message repeated 2 times
> Oct 10 14:35:09 loki kernel: bge0: watchdog timeout -- resetting
> Oct 10 14:35:09 loki kernel: bge0: PHY read timed out
> Oct 10 14:35:09 loki kernel: bge0: PHY read timed out
> Oct 10 14:35:09 loki kernel: bge0: RX CPU self-diagnostics failed!
> Oct 10 14:35:09 loki kernel: bge0: flow-through queue init failed
> Oct 10 14:35:09 loki kernel: bge0: initialization failure
> Oct 10 14:35:09 loki kernel: bge0: PHY read timed out
> Oct 10 14:35:14 loki last message repeated 5 times
> Oct 10 14:35:15 loki su: cz2nhc to root on /dev/ttyv0
> Oct 10 14:35:19 loki kernel: bge0: PHY read timed out
> Oct 10 14:35:29 loki last message repeated 7 times
> Oct 10 14:35:29 loki kernel: bge0: RX CPU self-diagnostics failed!
> Oct 10 14:35:30 loki kernel: bge0: flow-through queue init failed
> Oct 10 14:35:30 loki kernel: bge0: initialization failure
> Oct 10 14:35:30 loki kernel: bge0: PHY read timed out
> Oct 10 14:36:00 loki last message repeated 20 times
> 
> Only a reboot managed to get the onboard nic back in working order 
> again. I suspected hardware problems, called Dell support who couldn't 
> help me unless I had win XP installed. So I switched disks with a 
> colleage and lo and behold my bsd-disk in his laptop: no problem, his 
> disk in my laptop: no problem... Not telling Dell the whole story I 
> managed to convince them my disk in someone elses laptop worked fine 
> thus it must be hardware related. They replaced the systemboard and the 
> laptop worked fine for about a week or two and the same problem came 
> back... slowly increasing in frequency. At first it would be every few 
> days (I could live with that) but after a while it was every few hours 
> (no way I could live with that). Even worse, at one point the nic 
> wouldn't even show up in dmesg as if it wasn't there.
> Called Dell again... same blabla.. no XP no help. They insisted I 
> upgrade my bios ... so I did and everything worked again... for a day 
> and a half... the nic disappeared again. Tried both a linux and a XP 
> live cd .. none see the nic. In my messages file I get
> 
> Oct 14 18:11:02 loki kernel: pccard1: Card has no functions!
> Oct 14 18:11:02 loki kernel: cbb1: PC Card card activation failed
> 
> Does anyone have a bright idea of what is happening here? It looks like 
> a hardware issue to me but since the systemboard has already been 
> replaced I'll need some good arguments to convince the Dell boys it's 
> not a FreeBSD issue. Or could it be ?
> I'll gladly post any logs or output that could help ... just ask :-)
> 
> In working order the nic is listed in a scanpci as
> 
> pci bus 0x0002 cardnum 0x00 function 0x00: vendor 0x14e4 device 0x165d
> Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet
> 
> pci bus 0x0002 cardnum 0x01 function 0x00: vendor 0x1217 device 0x7113
> O2 Micro, Inc. Device unknown
> 
> pci bus 0x0002 cardnum 0x01 function 0x01: vendor 0x1217 device 0x7113
> O2 Micro, Inc. Device unknown
> 
> Thanx in advance for your help
> 
> Greetz,
> Philip


***** REPLY SEPARATOR *****
On 10/11/2005 5:29:42 PM, Gerard Replied:

Maybe I am missing something here, but if you switched disks and the
problem did not resurface, why are you wasting Dell's time swapping out
hardware? If you are going to buy a computer system and install an OS
that is not supported by the computer's manufacturer, you have to assume
all risks and responsibilities involved with that system. All you are
doing is wasting the time of the tech support people at Dell. They are
obviously not trained to work systems with non Microsoft OS's.

By the way, 5.2.1 is an old build. Why not try 5.4 instead. It might
very well rectify your problem.

-- 
Gerard Seibert
[EMAIL PROTECTED]
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to