hello again,

i installed FreeBSD 4.7, and it seems i can't get a ppp connection
to my ISP to work.  i didn't have this problem with FreeBSD 4.3,
(and don't have in linux), so i guess i must have done something
differently this time :-/  here's some info on my configuration:

aot# hostname
aot

aot# cat /etc/hosts
127.0.0.1               localhost

aot# cat /etc/resolv.conf
cat: /etc/resolv.conf: No such file or directory

aot# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500

aot# cat /etc/ppp/ppp.conf
#################################################################
# PPP  Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by [EMAIL PROTECTED]
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.2.2.5 2001/07/13 10:55:23 brian Exp $
#################################################################

default:
 #set log Phase Chat LCP IPCP CCP tun command
 set log All -debug -timer
 ident user-ppp VERSION (built COMPILATIONDATE)

 # Ensure that "device" references the correct serial port
 # for your modem. (cuaa0 = COM1, cuaa1 = COM2)
 #
 set device /dev/cuaa1

 set speed 115200
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
           \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
 set timeout 180                        # 3 minute idle timer (the default)
 enable dns                             # request DNS info (for resolv.conf)

papchap:
 #
 # edit the next three lines and replace the items in caps with
 # the values which have been assigned by your ISP.
 #

 #set phone PHONE_NUM
 #set authname USERNAME
 #set authkey PASSWORD

 set phone 2609002
 set authname erkkila
 set authkey *******!
        # authkey censored here, contains `!', shouldn't be relevant?
        # (that is, sent as it is, not interpreted?)

 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
 add default HISADDR                    # Add a (sticky) default route

install:
 set speed 115200
 set device /dev/cuaa1
 set ifaddr 0 0 255.255.255.0 0.0.0.0
 add! default HISADDR
 set timeout 0
 enable dns
 set log local phase
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\
dATDT\\T TIMEOUT 40 CONNECT"
 set login
 set authname erkkila
 set authkey *******!
 set phone 2609002

aot# cat /etc/ppp/ppp.linkup
MYADDR:
 delete ALL
 add 0 0 HISADDR

aot# cat /etc/ppp/ppp.secret
aot#

then some logs (from /var/log/ppp.log):

Dec 19 13:58:58 aot ppp[317]: Phase: Using interface: tun0 
Dec 19 13:58:58 aot ppp[317]: Phase: deflink: Created in closed state 
Dec 19 13:58:58 aot ppp[317]: tun0: Command: default: ident user-ppp VERSION (built 
COMPILATIONDATE) 
Dec 19 13:58:58 aot ppp[317]: tun0: Command: default: set device /dev/cuaa1 
Dec 19 13:58:58 aot ppp[317]: tun0: Command: default: set speed 115200 
Dec 19 13:58:58 aot ppp[317]: tun0: Command: default: set dial ABORT BUSY ABORT 
NO\sCARRIER TIMEOUT 5            "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT 
Dec 19 13:58:58 aot ppp[317]: tun0: Command: default: set timeout 180 
Dec 19 13:58:58 aot ppp[317]: tun0: Command: default: enable dns 
Dec 19 13:58:58 aot ppp[317]: tun0: Phase: PPP Started (interactive mode). 
Dec 19 13:59:06 aot ppp[317]: tun0: Command: /dev/tty: dial papchap 
Dec 19 13:59:06 aot ppp[317]: tun0: ID0: 0x28253be0 = fopen("/etc/ppp/ppp.conf", "r") 
Dec 19 13:59:06 aot last message repeated 2 times
Dec 19 13:59:06 aot ppp[317]: tun0: Command: papchap: set phone 2609002 
Dec 19 13:59:06 aot ppp[317]: tun0: Command: papchap: set authname erkkila 
Dec 19 13:59:06 aot ppp[317]: tun0: Command: papchap: set authkey ******** 
Dec 19 13:59:06 aot ppp[317]: tun0: Command: papchap: set ifaddr 10.0.0.1/0 10.0.0.2/0 
255.255.255.0 0.0.0.0 
Dec 19 13:59:06 aot ppp[317]: tun0: Command: papchap: add default HISADDR 
Dec 19 13:59:06 aot ppp[317]: tun0: ID0: 3 = socket(17, 3, 0) 
Dec 19 13:59:06 aot ppp[317]: tun0: ID0: -1 = write(3, data, 140) 
Dec 19 13:59:06 aot ppp[317]: tun0: TCP/IP: rt_Set failure: 
Dec 19 13:59:06 aot ppp[317]: tun0: TCP/IP: rt_Set:  Cmd = Add 
Dec 19 13:59:06 aot ppp[317]: tun0: TCP/IP: rt_Set:  Dst = 0.0.0.0/0 
Dec 19 13:59:06 aot ppp[317]: tun0: TCP/IP: rt_Set:  Gateway = 10.0.0.2 
Dec 19 13:59:06 aot ppp[317]: tun0: Phase: bundle: Establish 
Dec 19 13:59:06 aot ppp[317]: tun0: Phase: deflink: closed -> opening 
Dec 19 13:59:06 aot ppp[317]: tun0: ID0: 0 = uu_lock("cuaa1") 
Dec 19 13:59:06 aot ppp[317]: tun0: ID0: 2 = open("/dev/cuaa1", 6) 
Dec 19 13:59:06 aot ppp[317]: tun0: ID0: 0x28253be0 = fopen("/var/run/cuaa1.if", "w") 
Dec 19 13:59:06 aot ppp[317]: tun0: Phase: deflink: Connected! 
Dec 19 13:59:06 aot ppp[317]: tun0: Phase: deflink: opening -> dial 
Dec 19 13:59:06 aot ppp[317]: tun0: Chat: Phone: 2609002 
Dec 19 13:59:06 aot ppp[317]: tun0: Chat: deflink: Dial attempt 1 of 1 
Dec 19 13:59:06 aot ppp[317]: tun0: Chat: Send: AT^M 
Dec 19 13:59:06 aot ppp[317]: tun0: Physical: write 
Dec 19 13:59:06 aot ppp[317]: tun0: Physical:  41 54 0d                                
         AT. 
Dec 19 13:59:06 aot ppp[317]: tun0: Chat: Expect(5): OK 
Dec 19 13:59:11 aot ppp[317]: tun0: Chat: Expect timeout 
Dec 19 13:59:11 aot ppp[317]: tun0: Chat: Send: AT^M 
Dec 19 13:59:11 aot ppp[317]: tun0: Physical: write 
Dec 19 13:59:11 aot ppp[317]: tun0: Physical:  41 54 0d                                
         AT. 
Dec 19 13:59:11 aot ppp[317]: tun0: Chat: Expect(5): OK 
Dec 19 13:59:11 aot ppp[317]: tun0: Physical: read 
Dec 19 13:59:11 aot ppp[317]: tun0: Physical:  41 54 0d 0d 0a 4f 4b 0d 0a              
         AT...OK.. 
Dec 19 13:59:11 aot ppp[317]: tun0: Chat: Received: AT^M^M 
Dec 19 13:59:11 aot ppp[317]: tun0: Chat: Received: OK^M 
Dec 19 13:59:11 aot ppp[317]: tun0: Chat: Send: ATE1Q0^M 
Dec 19 13:59:11 aot ppp[317]: tun0: Physical: write 
Dec 19 13:59:11 aot ppp[317]: tun0: Physical:  41 54 45 31 51 30 0d                    
         ATE1Q0. 
Dec 19 13:59:11 aot ppp[317]: tun0: Chat: Expect(5): OK 
Dec 19 13:59:11 aot ppp[317]: tun0: Physical: read 
Dec 19 13:59:11 aot ppp[317]: tun0: Physical:  41 54 0d 0d 0a 4f 4b 0d 0a              
         AT...OK.. 
Dec 19 13:59:11 aot ppp[317]: tun0: Chat: Received: AT^M^M 
Dec 19 13:59:11 aot ppp[317]: tun0: Chat: Received: OK^M 
Dec 19 13:59:11 aot ppp[317]: tun0: Chat: Send: ATDT2609002^M 
Dec 19 13:59:11 aot ppp[317]: tun0: Physical: write 
Dec 19 13:59:11 aot ppp[317]: tun0: Physical:  41 54 44 54 32 36 30 39 30 30 32 0d     
         ATDT2609002. 
Dec 19 13:59:13 aot ppp[317]: tun0: Chat: Expect(40): CONNECT 
Dec 19 13:59:13 aot ppp[317]: tun0: Physical: read 
Dec 19 13:59:13 aot ppp[317]: tun0: Physical:  41 54 45 31 51 30 0d 0d 0a 4f 4b 0d 0a  
         ATE1Q0...OK.. 
Dec 19 13:59:13 aot ppp[317]: tun0: Chat: Received: ATE1Q0^M^M 
Dec 19 13:59:13 aot ppp[317]: tun0: Chat: Received: OK^M 
Dec 19 13:59:53 aot ppp[317]: tun0: Chat: Expect timeout 
Dec 19 13:59:53 aot ppp[317]: tun0: Warning: Chat script failed 
Dec 19 13:59:53 aot ppp[317]: tun0: Phase: deflink: dial -> hangup 
Dec 19 13:59:53 aot ppp[317]: tun0: Phase: deflink: Disconnected! 
Dec 19 13:59:53 aot ppp[317]: tun0: Phase: deflink: Connect time: 47 secs: 0 octets 
in, 0 octets out 
Dec 19 13:59:53 aot ppp[317]: tun0: Phase: deflink: 0 packets in, 0 packets out 
Dec 19 13:59:53 aot ppp[317]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Thu 
Dec 19 13:59:06 2002 
Dec 19 13:59:53 aot ppp[317]: tun0: ID0: 0 = unlink("/var/run/cuaa1.if") 
Dec 19 13:59:53 aot ppp[317]: tun0: ID0: 0 = uu_unlock("cuaa1") 
Dec 19 13:59:53 aot ppp[317]: tun0: Phase: deflink: hangup -> closed 
Dec 19 13:59:53 aot ppp[317]: tun0: ID0: 2 = socket(2, 2, 0) 
Dec 19 13:59:53 aot ppp[317]: tun0: ID0: 0 = ioctl(2, 3223349521, 0xbfbff4b0) 
Dec 19 13:59:53 aot ppp[317]: tun0: ID0: 0 = ioctl(2, 2149607696, 0xbfbff4b0) 
Dec 19 13:59:53 aot ppp[317]: tun0: Phase: bundle: Dead 
Dec 19 13:59:56 aot ppp[317]: tun0: Phase: /dev/tty: Client connection closed. 
Dec 19 13:59:56 aot ppp[317]: tun0: Phase: PPP Terminated (normal). 
Dec 19 13:59:56 aot ppp[317]: tun0: ID0: 2 = socket(2, 2, 0) 
Dec 19 13:59:56 aot ppp[317]: tun0: ID0: 0 = ioctl(2, 3223349521, 0xbfbff580) 
Dec 19 13:59:56 aot ppp[317]: tun0: ID0: 0 = ioctl(2, 2149607696, 0xbfbff580) 
Dec 19 13:59:56 aot ppp[317]: tun0: ID0: 0 = unlink("/var/run/tun0.pid") 

my ISP supports PAP, so shouldn't this work?  any help is
appreciated

Juha

-- 
People must not do things for fun.  We are not here for fun.  There is
no reference to fun in any Act of Parliament.
                                         -- A P Herbert, Uncommon Law

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Reply via email to