----- Original Message ----- From: "Lauri Ahonen" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 03, 2003 9:06 PM Subject: ppp on freebsd 4.7 - disable ccp?
> If I'm reading this logfile right trying to negotiate compression levels > kills my connection. > I got the connection working on windows by disabling software compression. > Dns is static, > so it's defined in resolv.conf. No ipv6 thank you > > (This is a GPRS connection, that's why the odd dial-in number and low com > speed) > > -bash-2.05b$ ppp > Working in interactive mode > Using interface: tun0 > ppp ON libretto> set device /dev/cuaa0 > ppp ON libretto> set speed 57600 > ppp ON libretto> disable dns > ppp ON libretto> disable ipv6 > ppp ON libretto> disable ipv6cp > ppp ON libretto> set log local phase lcp ipcp > ppp ON libretto> term > Phase: bundle: Establish > Phase: deflink: closed -> opening > Phase: deflink: Connected! > deflink: Entering terminal mode on /dev/cuaa0 > Type `~?' for help > Phase: deflink: opening -> carrier > Phase: deflink: /dev/cuaa0 doesn't support CD > Phase: deflink: carrier -> ready > AT > OK > ATZ > OK > AT+CGDCONT=1,"IP","internet" > OK > ATDT*99***1# > CONNECT > Phase: deflink: PPP packet detected, coming up > Phase: deflink: ready -> carrier > Phase: deflink: carrier -> lcp > LCP: FSM: Using "deflink" as a transport > LCP: deflink: State change Initial --> Closed > LCP: deflink: State change Closed --> Stopped > ppp ON libretto> LCP: deflink: LayerStart > LCP: deflink: SendConfigReq(1) state = Stopped > LCP: ACFCOMP[2] > LCP: PROTOCOMP[2] > LCP: ACCMAP[6] 0x00000000 > LCP: MRU[4] 1500 > LCP: MAGICNUM[6] 0xd8c553ad > LCP: deflink: State change Stopped --> Req-Sent > LCP: deflink: RecvConfigNak(1) state = Req-Sent > LCP: ACCMAP[6] 0x000a0000 > LCP: deflink: SendConfigReq(2) state = Req-Sent > LCP: ACFCOMP[2] > LCP: PROTOCOMP[2] > LCP: ACCMAP[6] 0x000a0000 > LCP: MRU[4] 1500 > LCP: MAGICNUM[6] 0xd8c553ad > LCP: deflink: RecvConfigAck(2) state = Req-Sent > LCP: ACFCOMP[2] > LCP: PROTOCOMP[2] > LCP: ACCMAP[6] 0x000a0000 > LCP: MRU[4] 1500 > LCP: MAGICNUM[6] 0xd8c553ad > LCP: deflink: State change Req-Sent --> Ack-Rcvd > LCP: deflink: RecvConfigReq(3) state = Ack-Rcvd > LCP: ACCMAP[6] 0x000a0000 > LCP: PROTOCOMP[2] > LCP: ACFCOMP[2] > LCP: MAGICNUM[6] 0x7e8713c3 > LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05) > LCP: deflink: SendConfigAck(3) state = Ack-Rcvd > LCP: ACCMAP[6] 0x000a0000 > LCP: PROTOCOMP[2] > LCP: ACFCOMP[2] > LCP: MAGICNUM[6] 0x7e8713c3 > LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05) > LCP: deflink: State change Ack-Rcvd --> Opened > LCP: deflink: LayerUp > LCP: deflink: SendIdent(0) state = Opened > LCP: MAGICNUM d8c553ad > LCP: TEXT user-ppp 3.1 (built Oct 8 2002) > Phase: bundle: Authenticate > Phase: deflink: his = CHAP 0x05, mine = none > Ppp ON libretto> Phase: Chap Input: CHALLENGE (20 bytes) > Phase: Chap Output: RESPONSE () > Phase: Chap Input: SUCCESS > Phase: deflink: lcp -> open > Phase: bundle: Network > IPCP: FSM: Using "deflink" as a transport > IPCP: deflink: State change Initial --> Closed > IPCP: deflink: LayerStart. > IPCP: deflink: SendConfigReq(1) state = Closed > IPCP: IPADDR[6] 127.0.0.1 > IPCP: COMPPROTO[6] 16 VJ slots with slot compression > IPCP: deflink: State change Closed --> Req-Sent > PPp ON libretto> LCP: deflink: RecvProtocolRej(4) state = Opened > LCP: deflink: -- Protocol 0x80fd (Compression Control Protocol) was > rejected! > IPCP: deflink: RecvConfigRej(1) state = Req-Sent > LCP: deflink: SendIdent(1) state = Opened > LCP: MAGICNUM d8c553ad > LCP: TEXT user-ppp 3.1 (built Oct 8 2002) > IPCP: COMPPROTO[6] 16 VJ slots with slot compression > IPCP: deflink: SendConfigReq(2) state = Req-Sent > IPCP: IPADDR[6] 127.0.0.1 > LCP: deflink: RecvTerminateReq(5) state = Opened > LCP: deflink: LayerDown > LCP: deflink: SendTerminateAck(5) state = Opened > LCP: deflink: State change Opened --> Stopping > Phase: deflink: open -> lcp > IPCP: deflink: State change Req-Sent --> Starting > IPCP: deflink: LayerFinish. > IPCP: Connect time: 1 secs: 0 octets in, 0 octets out > IPCP: 0 packets in, 0 packets out > IPCP: total 0 bytes/sec, peak 0 bytes/sec on Sat Jan 4 04:02:01 2003 > IPCP: deflink: State change Starting --> Initial > Phase: bundle: Terminate > ppp ON libretto> LCP: deflink: LayerFinish > LCP: deflink: State change Stopping --> Stopped > LCP: deflink: State change Stopped --> Closed > LCP: deflink: State change Closed --> Initial > Phase: deflink: Disconnected! > Phase: deflink: Connect time: 132 secs: 289 octets in, 362 octets out > Phase: deflink: 13 packets in, 10 packets out > Phase: total 4 bytes/sec, peak 129 bytes/sec on Sat Jan 4 04:02:03 2003 > Phase: deflink: lcp -> closed > Phase: bundle: Dead > ppp ON libretto> Since you didn't ask a question, I assume you wanted to ask "how can I disable software compression on FreeBSD"? The answer is to add "disable vjcomp" to your ppp.conf file. -- Matt Emmertno To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message