Hi,

I don't know why it doesn't detect the link media type. I have the same motherboard(M2N-SLI deluxe) and it works fine. Could you try to directly connect nfe0 to nfe1? If the link media type cannot be detected correctly in the case, thia seems to be the problem of cable or network hub. How about specifying the link media type with ifconfig?


Regards,
Shigeaki Tagashira

Palle Girgensohn wrote:
Hello,

Is there any way I can help to try and fix this?

Regards,
Palle

--On torsdag, december 21, 2006 19.04.17 +0100 Palle Girgensohn <[EMAIL PROTECTED]> wrote:



--On torsdag, december 21, 2006 00.29.10 +0900 Shigeaki Tagashira
<[EMAIL PROTECTED]> wrote:

Palle Girgensohn wrote:
--On söndag, december 17, 2006 01.06.24 +0900 Shigeaki Tagashira
<[EMAIL PROTECTED]> wrote:

I have the same one. And if_nfe works well on it, in both FreeBSD
6.2-PRERELEASE and 7-CURRENT. Please try to initialize if_nfe using
ifconfig command;
# ifconfig nfe1 down; ifconfig nfe1 up

---
S. Tagashira

Hi Tagashira-san,

Tried a lot of stuff, up and down and also "debug" flag, but nothing
helps.

ifconfig says "media: Ethernet autoselect (none)"

I can ping the interface itself, but nothing else.

Any ideas?

Hi,
I updated my web site for FreeBSD nfe driver.
Please try the lastest nfe driver and e1000phy patch provided on the web
site. These codes were modified to detect link media more correctly.


Hello,

Sorry, there's no change, it still acts the same way.

media: Ethernet autoselect (none)
status: active

and the network does not work. No mediaopts work.

Regards,
Palle



---
S. Tagashira




Regards,
Palle





Palle Girgensohn wrote:
Hi! Sorry for the cross post, I'd love to know if I can get this
working or not.

Regards,
Palle

---------- Forwarded Message ----------
Date: tisdag, december 12, 2006 18.52.35 +0100
From: Palle Girgensohn <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: if_nfe on Asus M2N-SLI deluxe?

Hi!

Does anybody know if if_nfe should work on the above motherboard? I
snached the patch for FreeBSD-6.2 from
<http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>
and
tried it. The kernel and ifconfig seems happy, but it does not work;
ifconfig reports "active" but ifconfig reports:

nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
       options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
       ether 00:17:31:86:aa:31
       media: Ethernet autoselect (none)
       status: no carrier
nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
       options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
       inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid 0x4
inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255
       ether 00:17:31:86:b4:c6
       media: Ethernet autoselect (none)
       status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
       inet6 ::1 prefixlen 128        inet6 fe80::1%lo0 prefixlen 64
scopeid 0x5        inet 127.0.0.1 netmask 0xff000000
The media part of nfe1 looks bad, eh?

Is it supposed to work? How can I help to get it working?

FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else
needed?

/Palle



---------- End Forwarded Message ----------




----------------------------------------------------------------------
--

Subject:
if_nfe on Asus M2N-SLI deluxe?
From:
Palle Girgensohn <[EMAIL PROTECTED]>
Date:
Tue, 12 Dec 2006 18:52:35 +0100
To:
[EMAIL PROTECTED]

To:
[EMAIL PROTECTED]
CC:
[EMAIL PROTECTED]


Hi!

Does anybody know if if_nfe should work on the above motherboard? I
snached the patch for FreeBSD-6.2 from
<http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>
and
tried it. The kernel and ifconfig seems happy, but it does not work;
ifconfig reports "active" but ifconfig reports:

nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
       options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
       ether 00:17:31:86:aa:31
       media: Ethernet autoselect (none)
       status: no carrier
nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
       options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
       inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid
0x4       inet 192.168.1.191 netmask 0xffffff00 broadcast
192.168.1.255 ether 00:17:31:86:b4:c6
       media: Ethernet autoselect (none)
       status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
       inet6 ::1 prefixlen 128       inet6 fe80::1%lo0 prefixlen 64
scopeid 0x5       inet 127.0.0.1 netmask 0xff000000
The media part of nfe1 looks bad, eh?

Is it supposed to work? How can I help to get it working?

FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else
needed?

/Palle



----------------------------------------------------------------------
--

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994 The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Wed Nov 29 11:57:06 CET 2006
[EMAIL PROTECTED]:/usr/obj/.a/banan/usr/src/sys/WORKSTA
    TI ON Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3500+ (2210.20-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,
  PG E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD
  Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 2146369536 (2046 MB)
avail memory = 2091245568 (1994 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq
21 at device 2.0 on pci0 ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff
irq 22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 4.0 on
pci0 ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem
0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0 ata2: <ATA channel
0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem
0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0 ata4: <ATA channel
0> on atapci2
ata5: <ATA channel 1> on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controller> port
0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f
mem 0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0 ata6: <ATA
channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xac00-0xac1f mem
0xfdeff000-0xfdefffff,0xfdc00000-0xfdcfffff irq 16 at device 6.0 on
pci1 miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:ce:11:26
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 19 at device 11.0 on
pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:c8:2b:85
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:c8:2b:85
fwe0: Ethernet address: 02:11:d8:c8:2b:85
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci0: <multimedia> at device 6.1 (no driver attached)
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem
0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq
23 at device 8.0 on pci0 miibus1: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus1
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto nfe0: Ethernet address: 00:17:31:86:aa:31
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem
0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq
20 at device 9.0 on pci0 miibus2: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> on miibus2
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto nfe1: Ethernet address: 00:17:31:86:b4:c6
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci6: <ACPI PCI bus> on pcib6
atapci4: <JMicron JMB363 SATA300 controller> port
0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407,0x9000-0x9003,0x8c00-0x8c0f
mem 0xfdafe000-0xfdafffff irq 16 at device 0.0 on pci6 atapci4: AHCI
Version 01.00 controller with 2 ports detected
ata8: <ATA channel 0> on atapci4
ata9: <ATA channel 1> on atapci4
ata10: <ATA channel 2> on atapci4
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci7: <ACPI PCI bus> on pcib7
nvidia0: <GeForce 6200 TurboCache(TM)> mem
0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq
16 at device 0.0 on pci7 nvidia0: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0 fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0 sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd67ff on
isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ukbd0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass
3/1
kbd1 at ukbd0
uhid0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass
3/1
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 3, iclass
3/1
ums0: 6 buttons and Z dir.
Timecounter "TSC" frequency 2210201999 Hz quality 800
Timecounters tick every 0.801 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
disabled, default to accept, logging disabled ad0: 152627MB <Seagate
ST3160212A 3.AAJ> at ata0-master UDMA100 acd0: DVDR <Optiarc DVD RW
AD-5170A/1.11> at ata0-slave UDMA66
cd0 at ata0 bus 0 target 1 lun 0
cd0: <Optiarc DVD RW AD-5170A 1.11> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present Trying to mount root from ufs:/dev/ad0s1a


----------------------------------------------------------------------
--

_______________________________________________
freebsd-hardware@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to
"[EMAIL PROTECTED]"











_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to