Message: 11 Date: Fri, 20 Apr 2007 09:58:32 -0700 From: Chuck Swiger <[EMAIL
PROTECTED]> Subject: Re: SMP only detects one CPU - help? To: [EMAIL PROTECTED] Cc:
email@example.com Message-ID: <[EMAIL PROTECTED]> Content-Type:
text/plain; charset=US-ASCII; delsp=yes; format=flowed On Apr 20, 2007, at 9:14 AM, Adam J
> Finally, mptable shows what's really going on:
> "MP Config Base Table Entries:
> Processors: APIC ID Version State Family Model Step Flags
> 3 0x11 BSP, usable 6 8 3 0x387fbff
> 0 0x11 AP, unusable 6 8 3 0x387fbff"
> Apparently the "application processor" is "unusable", whatever that
> means. I am now stuck.
> Is there a software fix for this, or do I have a broken CPU,
> unlikely as it seems? Any help is appreciated.
> Does it seem likely that upgrading both CPUs to the highest Pentium-
> IIIs I can find, which I was thinking about doing anyway, would fix
> the problem?
It's more likely that updating the system BIOS and trying to tweak
any settings related to SMP or ACPI might help. You might also try
enabling or toggling the "PnP OS installed", to avoid having the BIOS
configure stuff it doesn't need to boot, and leaving FreeBSD to
assign IRQs itself...
If that doesn't help, I believe there's a freebsd-acpi list which
contain people who can look at the dump of your BIOS and fix the
broken IRQ assignments it is doing.
Thanks Chuck. I'll give these suggestions a try and post feedback when
I'm done. Might not be for two weeks though, as I'm just about to go on
a trip to the US. :)
Adam J Richardson
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"