Hi Adam, Thanks for you reply, I am using the SMC barricade router,SMC7004ABR, w/ an Admin GUI, according to the GUI it has been updated, where else would I find that info, netstat's routing tables do not seem to supply that. When I try to ssh or even ftp in I get the message: No address associated with hostname Thanks -- Joe --
Adam Maas wrote: > If you are using static mappings, check to see if they are IP they are > mapping from was updated (External IP) > > Adam > > ----- Original Message ----- > From: "Joseph Maxwell" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, January 25, 2003 12:02 AM > Subject: IP Changed ==> Problem > > > Hello, > > I recently changed my ISP - DSL provider, a new static IP, and now > > having problems ssh'ing in, none before. > > My config ==> > > > > ISP[DSL] ==>Modem==>Router/Gateway ==> Hub____LAN machine(1) > > |____LAN machine(2) > > |---- > > |____LAN machine(n) > > > > The LAN side machines are configured w/ NAT and the mapping are > > unchanged, using 192.168.x.n etc. The WAN side is configured correctly, > > I think. I can access the internet from the LAN, SSH & Telnet. However I > > cannot telnet or SSH into the LAN and the Port mappings are the same as > > before??? The only change has been to the Gateway configuration, IP #, > > DNS & subnetmask. > > What am I missing? > > Thanks! > > -- Joe -- > > > > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message