It uses an ICH7 southbridge. Any ideas?
On 8/28/07, Predrag Punosevac <[EMAIL PROTECTED] > wrote: > > You find the specification of your mother board and the south bridge > chip set should be listed. Should be included in computer documentation > or go to web site of Compaq and check. That is one of the key > specifications > of your mother board. If I remember well the south bridge chip set is > in charge with your USB. We could check right away against > hardware compatibility list if there is really some issue with your chip > set. Since you are really running and older version of FreeBSD > and your Compact might be brand new maybe there is some issue. I hope > more knowledgeable get involved in our discussion. > > Why did you post your question in multimedia? Try also posting it on > [EMAIL PROTECTED] > > > > Robert Nicholson wrote: > > Hi Predrag, > > > > Thank you for your mail. > > > > I installed FreeBSD 6.0 since I was instructed to do so because we > > want to test the network testing tools that we develop at work > > specifically for systems running FreeBSD 6.0 as many of our customers > > still use FBSD 6.0 > > > > I am not auto mounting the drives. > > > > I am trying to mount the drive manually but /dev/da* does not get > > created automatically when the drive is plugged in to the USB slot. > > There is no message in dmesg or in /var/log/messages either. > > > > Yes I do have usbd_enable="YES" in /etc/rc.conf > > > > How do you find out which bridge chipset it is? > > > > Thanks. > > Michael. > > > > On 8/28/07, * Predrag Punosevac* <[EMAIL PROTECTED] > > <mailto:[EMAIL PROTECTED]>> wrote: > > > > Out of curiosity why did you install 6.0 version when there is 6.2 > > version? Are you trying to do auto mount on usb drive or you mounted > > > your pan manually. HAL really had issues until maybe half a year > ago. > > The question is which version of HAL you use. > > Do you have usbd_enable="YES" in rc.conf file.(usb deamon) I > do not > > know if the daemon is behaving differently on older machines. > > Try to mount thins manually first. I have intell 945G chipset but > > that > > is the North Bridge. What is your south bridge Chipset? > > > > > > > > Robert Nicholson wrote: > > > Predrag, sorry for the mistake. > > > > > > Hi everyone, > > > > > > I just installed FreeBSD 6.0 on a HP Compaq DC7600 Small Form > > Factor > > > PC at work. It uses an intel 945G chipset. I could not get the > > > broadcom NIC to work so we replaced it with a D-Link NIC and > > that works. > > > > > > The other problem is that the four USB ports on the machine are > > > recognized and the /dev/ directory has character devices usb1 to > > usb4 > > > but plugging in any usb drive (including a USB pen drive) causes > the > > > system to hang for about 4 seconds and then the drive is not > > > recognized. There are no /dev/da* devices, no dmesg messages and > no > > > /var/log/messages either. > > > > > > I checked the kernel config. Devices umass, ehci, ohci , uhci, > > usb. da > > > as well as scbus are all enabled. I am at a loss on how to solve > > this > > > problem. Please help. > > > > > > Thanks and Regards, > > > Michael. > > > > > > _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"