On Tue, 2 Oct 2007 at 07:36 +0200, [EMAIL PROTECTED] confabulated:
2007/10/2, Duane Hill <[EMAIL PROTECTED]>:
On Tue, 2 Oct 2007 at 07:23 +0200, [EMAIL PROTECTED] confabulated:
Hello again,
Through df I realized my / partiotion is out of space:
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/ad0s1a 198126 196070 -13794 108% /
devfs 1 1 0 100% /dev
/dev/ad0s1e 44511308 4217762 36732642 10% /usr
/dev/ad0s1d 30462636 3210580 24815046 11% /var
devfs 1 1 0 100% /var/named/dev
/dev/da0s1c 75685352 34308200 35322324 49% /mnt/usbck
How can I determine what occupies the space in it? That is, it is not
big as you can see. So I issued:
du -hs /
but it was taking ages (I am not sure but maybe du -hs counts all
directories on the HD?
Anyway, I do not really know where to look what has eaten the / space.
Were it for /usr or /var, it would be obvious to me where to look for
information.
Many thanks!
I don't see you have defined a /tmp partition. Perhaps /tmp is taking up
all the space. Try:
du -h /tmp
and see how much /tmp is taking up.
du -hs /tmp
1.4M /tmp
du -hs /
40GB
One thing that comes to my mind. Each Sunday I have a script which
makes a full dump of the HD to a back-up USB drive. Last weekend
someone cleaining the computer room, must have accidentally powered
off the USB drive. As a result, the dump has not been completed
because the USB drive was not mounted at that time. I use cron for
this task. Does it matter could have caused this?
If the '-L' switch is used (telling dump it is dumping a live file system)
it will first dump everything into a .snap directory before performing the
dump. What does:
du -hs /.snap
give for a result?
Thank you Duane! Yes, I do use the L switch.
Unfortunately,
du -hs /.snap
2.0K /.snap
Hah - mystery cleared!
I know what happened but you put me on the right track.
For the record. During the backup, the file system is dumped to a dir
on a USB drive called backup. Now, since the drive was unavailable,
the dump utility created /backup dir and populated it with
lists-var-l0-2007-09-30.dump.bz2 (dumping var) but of course it died
as there was not enough space on the / to do it. I mean this is what I
make of this.
So after deleting /backup I get:
df
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/ad0s1a 198126 74084 108192 41% /
devfs 1 1 0 100% /dev
/dev/ad0s1e 44511308 4217760 36732644 10% /usr
/dev/ad0s1d 30462636 3210650 24814976 11% /var
devfs 1 1 0 100% /var/named/dev
/dev/da0s1c 75685352 34308200 35322324 49% /mnt/usbck
I'm still learning about all the little details about the workings of
dump myself. It would seem to me, you are dumping to /backup which is the
mount point for the USB device. Would that hold true?
------
_|_
(_| |
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
