--On Thursday, December 06, 2007 19:14:51 +0100 Wojciech Puchar
<[EMAIL PROTECTED]> wrote:
/home/pauls/Downloads/FreeBSD/6.2-RELEASE-amd64-disc1.iso fixate
burncd: ioctl(CDRIOCWRITESPEED): Input/output error
[EMAIL PROTECTED] mount /dev/acd
acd0 acd1
[EMAIL PROTECTED] mount /dev/acd1 /mnt/cdrom/
mount: /dev/acd1: Input/output error
mount_cd9660 - unless you use FFS on CD/DVD.
Yeah, I knew that. Just mistyped it. The results are the same in either
case - input/output error.
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: No disk / Wrong disk!
looks like your device is broken - reports no disk
Does this provide any additional information?
[EMAIL PROTECTED] atacontrol cap acd1
Protocol ATA/ATAPI revision 5
device model TSSTcorpCD-RW TS-H292B
serial number
firmware revision DE03
cylinders 0
heads 0
sectors/track 0
lba supported
lba48 not supported
dma supported
overlap not supported
Feature Support Enable Value Vendor
write cache no no
read ahead no no
Tagged Command Queuing (TCQ) no no 0/0x00
SMART no no
microcode download no no
security no no
power management yes yes
advanced power management no no 0/0x00
automatic acoustic management no no 0/0x00 0/0x00
The result of this command doesn't change if there's a known good CD in the
drive. And are you saying that the *device* appears to be bad? Or the
*driver* appears to be bad? Is there a way to confirm this (utility? test
process?)
--
Paul Schmehl ([EMAIL PROTECTED])
Senior Information Security Analyst
The University of Texas at Dallas
http://www.utdallas.edu/ir/security/
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"