$ pkg_info | grep nut
nut-2.2.1_1         Network UPS Tools

$ grep driver /usr/local/etc/nut/*.conf | grep -v \#
/usr/local/etc/nut/ups.conf:    driver = usbhid-ups

$ grep Ellipse /usr/local/etc/nut/driver.list | grep 750 | grep usb
"MGE Office Protection Systems" "Ellipse ASR USBS 600/750/1000/1500 VA"
"USB cable"     "usbhid-ups"
"MGE UPS SYSTEMS"       "Ellipse Office 750"            "USB"   "usbhid-ups"

$ sudo /usr/local/etc/rc.d/nut start
Network UPS Tools - UPS driver controller 2.2.1
Network UPS Tools: 0.29 USB communication driver - core 0.32 (2.2.1)

Using subdriver: MGE HID 1.01
Starting nut.
Network UPS Tools upsd 2.2.1
listening on port 3493
Connected to UPS [ellipse]: usbhid-ups-ellipse

Broadcast Message from [EMAIL PROTECTED]
        (no tty) at 7:34 CEST...

Communications with UPS [EMAIL PROTECTED] established

It seems to be the good driver.
It seems to be the last nut version.
It seems to run weel during about 1/2 day, and then crash :/


De : Derek Ragona [mailto:[EMAIL PROTECTED] 
Envoyé : jeudi 1 mai 2008 20:14
À : Olivier GARNIER; freebsd-questions@freebsd.org
Objet : Re: Nut problem and last message repeated in dmesg

Make sure you are using the correct driver.  Nut has consolidated and
changed drivers in recent releases.  


freebsd-questions@freebsd.org mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to