Wojciech Puchar wrote:
> i don't think it's interrupt sharing problems.
>
> anyway - turn on MSI interrupts if your hardware can.
>
I dont seem so (unless i interpret the output of pciconf wrong:
[EMAIL PROTECTED] ~]# pciconf -lc
[EMAIL PROTECTED]:0:0:0: class=0x060000 card=0x342f8086 chip=0x25788086
rev=0x02 hdr=0x00
cap 09[e4] = vendor (length 6) Intel cap 3 version 1
[EMAIL PROTECTED]:0:3:0: class=0x060400 card=0x00000000 chip=0x257b8086
rev=0x02 hdr=0x01
[EMAIL PROTECTED]:0:28:0: class=0x060400 card=0x00000000 chip=0x25ae8086
rev=0x02 hdr=0x01
cap 07[50] = PCI-X 64-bit bridge supports
[EMAIL PROTECTED]:0:29:0: class=0x0c0300 card=0x342f8086 chip=0x25a98086
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:0:29:1: class=0x0c0300 card=0x342f8086 chip=0x25aa8086
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:0:29:4: class=0x088000 card=0x342f8086 chip=0x25ab8086
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:0:29:5: class=0x080020 card=0x342f8086 chip=0x25ac8086
rev=0x02 hdr=0x00
cap 07[50] = PCI-X 64-bit supports 512 burst read, 1 split transaction
[EMAIL PROTECTED]:0:29:7: class=0x0c0320 card=0x342f8086 chip=0x25ad8086
rev=0x02 hdr=0x00
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0x80 in map 0x14
[EMAIL PROTECTED]:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
rev=0x0a hdr=0x01
[EMAIL PROTECTED]:0:31:0: class=0x060100 card=0x00000000 chip=0x25a18086
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:0:31:1: class=0x01018a card=0x342f8086 chip=0x25a28086
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:0:31:2: class=0x01048f card=0x34308086 chip=0x25b08086
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:0:31:3: class=0x0c0500 card=0x342f8086 chip=0x25a48086
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:1:1:0: class=0x020000 card=0x342f8086 chip=0x10758086 rev=0x00
hdr=0x00
cap 01[dc] = powerspec 2 supports D0 D3 current D0
[EMAIL PROTECTED]:3:0:0: class=0x030000 card=0x342f8086 chip=0x47521002
rev=0x27 hdr=0x00
cap 01[5c] = powerspec 2 supports D0 D1 D2 D3 current D0
[EMAIL PROTECTED]:3:1:0: class=0x020000 card=0x342f8086 chip=0x12298086
rev=0x10 hdr=0x00
cap 01[dc] = powerspec 2 supports D0 D1 D2 D3 current D0
> check if producing high load on atapci1 make problem worse or not.
>
During "dd if=/dev/random of=bigfile bs=500k count=50000" (about 200
seconds) made the network unresponsive again. Same symptom as I got when
running make buildworld.
--
chs
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
