On Sat, Jul 18, 2009 at 2:02 AM, Mel
Flynn<mel.flynn+fbsd.questi...@mailing.thruhere.net> wrote:
> On Friday 17 July 2009 18:59:49 Andrey Shuvikov wrote:
>
>> I'm trying to configure X and according to the manual enabled DBUS and
>> HALD. But when hald is starting up I get kernel panic:
>>
>> kmem_malloc: entry not found or misaligned
>>
>> Does anyone know what could be wrong? I have memory dump if it can
>> help but it's big (173M).
>
> If you have a file /var/crash/vmcore.0, you will want to run the
> following command:
> kgdb /boot/kernel/kernel /var/crash/vmcore.0
> Then type bt at the prompt and paste output here.
>
> More info:
> <http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug.html>
>
> uname -a and dmesg output also help in diagnosing this problem.
> --
> Mel
>
The uname output is:
FreeBSD foxtrot.home 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1
08:49:13 UTC 2009
r...@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
The kgdb output:
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-marcel-freebsd"...
Unread portion of the kernel message buffer:
panic: kmem_malloc: entry not found or misaligned
cpuid = 0
Uptime: 52s
Physical memory: 2034 MB
Dumping 176 MB: 161 145 129 113 97 81 65 49 33 17 1
Reading symbols from /boot/kernel/linux.ko...Reading symbols from
/boot/kernel/linux.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/linux.ko
#0 doadump () at pcpu.h:196
196 pcpu.h: No such file or directory.
in pcpu.h
(kgdb) bt
#0 doadump () at pcpu.h:196
#1 0xc07e25a7 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:418
#2 0xc07e2879 in panic (fmt=Variable "fmt" is not available.
) at /usr/src/sys/kern/kern_shutdown.c:574
#3 0xc0a1cdc0 in kmem_malloc (map=0xc147108c, size=0, flags=2)
at /usr/src/sys/vm/vm_kern.c:381
#4 0xc0a13357 in page_alloc (zone=0x0, bytes=0, pflag=0xe7b6497f "\002",
wait=2) at /usr/src/sys/vm/uma_core.c:952
#5 0xc0a15e20 in uma_large_malloc (size=0, wait=2)
at /usr/src/sys/vm/uma_core.c:2706
#6 0xc07d16f8 in malloc (size=0, mtp=0xc0c46580, flags=2)
at /usr/src/sys/kern/kern_malloc.c:393
#7 0xc0743044 in uhidopen (dev=0xc5713000, flag=1, mode=8192, p=0xc5c6a460)
at /usr/src/sys/dev/usb/uhid.c:428
#8 0xc07a56a0 in giant_open (dev=0xc5713000, oflags=1, devtype=8192,
td=0xc5c6a460) at /usr/src/sys/kern/kern_conf.c:332
#9 0xc076e1fc in devfs_open (ap=0xe7b64a88)
at /usr/src/sys/fs/devfs/devfs_vnops.c:908
#10 0xc0af88d2 in VOP_OPEN_APV (vop=0xc0c47ee0, a=0xe7b64a88)
at vnode_if.c:371
#11 0xc0870829 in vn_open_cred (ndp=0xe7b64b7c, flagp=0xe7b64c78, cmode=0,
cred=0xc5470100, fp=0xc5b57da8) at vnode_if.h:199
#12 0xc0870973 in vn_open (ndp=0xe7b64b7c, flagp=0xe7b64c78, cmode=0,
fp=0xc5b57da8) at /usr/src/sys/kern/vfs_vnops.c:94
#13 0xc086e0a3 in kern_open (td=0xc5c6a460,
path=0xbfbfe90c <Address 0xbfbfe90c out of bounds>,
pathseg=UIO_USERSPACE, flags=1, mode=0)
at /usr/src/sys/kern/vfs_syscalls.c:1042
#14 0xc086e610 in open (td=0xc5c6a460, uap=0xe7b64cfc)
at /usr/src/sys/kern/vfs_syscalls.c:1009
#15 0xc0ae4495 in syscall (frame=0xe7b64d38)
at /usr/src/sys/i386/i386/trap.c:1090
#16 0xc0ac9260 in Xint0x80_syscall ()
at /usr/src/sys/i386/i386/exception.s:255
#17 0x00000033 in ?? ()
Previous frame inner to this frame (corrupt stack?)
(kgdb) q
The dmesg:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009
r...@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (2999.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2146893824 (2047 MB)
avail memory = 2091225088 (1994 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I_ OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
0xd0000000-0xdfffffff,0xfe8e0000-0xfe8effff irq 16 at device 0.0 on
pci1
pci1: <multimedia, HDA> at device 0.1 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at
device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at
device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at
device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ffc00-0xfe7fffff
irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on uhub3
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <Marvell 88SX6121 UDMA133 controller> port
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f
mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci3
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib4
ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f
mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci2
ale0: 960 Tx FIFO, 1024 Rx FIFO
ale0: Using 1 MSI messages.
miibus0: <MII bus> on ale0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ale0: Ethernet address: 00:22:15:5a:67:e8
ale0: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at
device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at
device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at
device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff800-0xfe7ffbff
irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
ugen0: <Microsoft Microsoft LifeCam VX-5000, class 239/2, rev
2.00/1.00, addr 2> on uhub7
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
fwohci0: <Lucent FW322/323> mem 0xfebff000-0xfebfffff irq 19 at device
3.0 on pci5
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:1e:8c:00:01:63:47:d0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:1e:8c:63:47:d0
fwe0: Ethernet address: 02:1e:8c:63:47:d0
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:1e:8c:00:01:63:47:d0 @ 0xfffe00000000,
S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x12e4000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH10 SATA300 controller> port
0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata3: <ATA channel 0> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 1> on atapci1
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH10 SATA300 controller> port
0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
irq 19 at device 31.5 on pci0
atapci2: [ITHREAD]
ata5: <ATA channel 0> on atapci2
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
ata6: [ITHREAD]
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - EE,
should be E5 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 618092006000920
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd27ff pnpid ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhid0: <Yealink Network Technology Ltd. VOIP USB Phone, class 0/0, rev
1.01/0.00, addr 2> on uhub5
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: DVDR <PLEXTOR DVDR PX-712A/1.04> at ata2-master UDMA33
ad6: 152627MB <WDC WD1600JS-00SGB0 20.06C03> at ata3-master SATA300
ad8: 305245MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata4-master SATA300
GEOM_LABEL: Label for provider ad6s1 is msdosfs/FREEDOS.
GEOM_LABEL: Label for provider ad8s1 is ntfs/New Volume.
GEOM_LABEL: Label for provider ad6s3a is ufsid/4a5a61fa90383ccc.
GEOM_LABEL: Label for provider ad6s3d is ufsid/4a5a61fc87a6c3a0.
GEOM_LABEL: Label for provider ad6s3e is ufsid/4a5a61fa5b9a9e33.
GEOM_LABEL: Label for provider ad6s3f is ufsid/4a5a61fb3ef7459f.
GEOM_LABEL: Label for provider ad6s3g is ufsid/4a5a61fa4e22975e.
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:1): Medium not present
(probe0:umass-sim0:0:0:1): Unretryable error
(probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
(probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:2): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:2): Medium not present
(probe0:umass-sim0:0:0:2): Unretryable error
(probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
(probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:3): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:3): Medium not present
(probe0:umass-sim0:0:0:3): Unretryable error
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB xD/SM Reader 1.02> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad6s3a
GEOM_LABEL: Label ufsid/4a5a61fa90383ccc removed.
GEOM_LABEL: Label for provider ad6s3a is ufsid/4a5a61fa90383ccc.
GEOM_LABEL: Label ufsid/4a5a61fa4e22975e removed.
GEOM_LABEL: Label for provider ad6s3g is ufsid/4a5a61fa4e22975e.
GEOM_LABEL: Label ufsid/4a5a61fa5b9a9e33 removed.
GEOM_LABEL: Label for provider ad6s3e is ufsid/4a5a61fa5b9a9e33.
GEOM_LABEL: Label ufsid/4a5a61fb3ef7459f removed.
GEOM_LABEL: Label for provider ad6s3f is ufsid/4a5a61fb3ef7459f.
GEOM_LABEL: Label ufsid/4a5a61fc87a6c3a0 removed.
GEOM_LABEL: Label for provider ad6s3d is ufsid/4a5a61fc87a6c3a0.
GEOM_LABEL: Label ufsid/4a5a61fa90383ccc removed.
GEOM_LABEL: Label ufsid/4a5a61fa4e22975e removed.
GEOM_LABEL: Label ufsid/4a5a61fa5b9a9e33 removed.
GEOM_LABEL: Label ufsid/4a5a61fb3ef7459f removed.
GEOM_LABEL: Label ufsid/4a5a61fc87a6c3a0 removed.
GEOM_LABEL: Label msdosfs/FREEDOS removed.
GEOM_LABEL: Label for provider ad6s1 is msdosfs/FREEDOS.
GEOM_LABEL: Label msdosfs/FREEDOS removed.
Thanks,
Andrey
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
