On Sunday 27 September 2009 22:51:02 Mario Lobo wrote:
> On Sunday 27 September 2009 16:13:38 Sébastien Serre wrote:
> > On Sunday 27 September 2009 18:17:22 Sébastien Serre wrote:
> > > Hello, I hope somebody here known well tap interfaces on freebsd :).
> > >
> > > I try to configure virtualbox with bridge interface. Everything seams
> > > ok: # ifconfig tap0
> > >
> > > tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric
> > > 0 mtu 1500
> > >         ether 00:bd:4f:0a:00:00
> > >         inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
> > >
> > > # ls -l /dev/tap0
> > > crw-rw-rw-  1 root  wheel    0, 109 Sep 27 16:54 /dev/tap0
> > >
> > > The problem is that nothing pass in the tap0 interface. tcpdump does
> > > not show any traffic when I try to connect a machine on the 192.168
> > > network. I can ping the interface address (192.168.0.1). But without
> > > with the use of the tap itself (use of lo0):
> > >
> > > # route -n get 192.168.0.1
> > >    route to: 192.168.0.1
> > > destination: 192.168.0.1
> > >   interface: lo0
> > >       flags: <UP,HOST,DONE,LLINFO,WASCLONED,LOCAL>
> > >  recvpipe  sendpipe  ssthresh  rtt,msec    rttvar  hopcount      mtu
> > > expire
> > >        0         0         0         0         0         0     16384
> > >   0
> > >
> > >
> > > Then i have a tap interface up, but i can't pass to it any traffic.
> > > Does anybody have a suggestion, or know some debugging tools to show
> > > what append?
> > >
> > > Thanks
> > >
> > > Sebovick
> > > _______________________________________________
> > > freebsd-questions@freebsd.org mailing list
> > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > > To unsubscribe, send any mail to
> > >  "freebsd-questions-unsubscr...@freebsd.org"
> >
> > Me again,
> >
> > I can now listen something on tap0:
> >
> > # tcpdump -i tap0
> > tcpdump: verbose output suppressed, use -v or -vv for full protocol
> > decode listening on tap0, link-type EN10MB (Ethernet), capture size 96
> > bytes 21:08:22.668835 arp who-has 192.168.0.1 tell 192.168.0.101
> > 21:08:23.668526 arp who-has 192.168.0.1 tell 192.168.0.101
> > 21:08:24.668272 arp who-has 192.168.0.1 tell 192.168.0.101
> > 21:08:25.671499 arp who-has 192.168.0.1 tell 192.168.0.101
> >
> > 192.168.0.101 is my virtual machine trying to ping the host address of
> > the tap interface. The host did not reply.
> > When I try to ping the guest from the host, tcpdump stay silent.
> >
> > So the tap interface is ok for the guest, but the host don't know how to
> >  talk against tap. Any idea?
> > _______________________________________________
> > freebsd-questions@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to
> >  "freebsd-questions-unsubscr...@freebsd.org"
> 
>  is the brige0 interface up too?
> 

Hello,

Yes it is. tcpdump see packets on bridge0 to. I jus have a doubt. I'm trying 
to connect the bridge to a physical interface that is not used (no carrier). 

re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 
1500
        
options=3898<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
        ether 00:1f:d0:8e:79:5f
        inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
        media: Ethernet autoselect (none)
        status: no carrier

It is up, but status is nocarrier and media is none. I think it can be the 
problem.
bridge0 contain re0 ant tap0, packets can be logged with tcpdump on tap0 and 
bridge0, re0 don't work.

I will try tomarrow again.

Thanks for your suggestion :).
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"

Reply via email to