What software, base or ports, is used to burn a CD or DVD on a SATA drive, /dev/cd0 ?
Would burncd be appropriate, or do I need cdrtools? Or cdrkit? This is on FreeBSD 9.0-RC1 amd64. I built and installed sysutils/cdrtools when there was a thread on burncd and SATA, but cdrecord can't see anything (running "cdrecord -scanbus"): cdrecord: Inappropriate ioctl for device. CAMIOCOMMAND ioctl failed. Cannot open or use SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd9.0) Copyright (C) 1995-2010 Jörg Schilling Running "cdrecord dev=help" or "cdrecord dev=HELP:" did no better. I had a similar problem on the older computer (i386 with ATA, not SATA) in NetBSD, but cdrecord ran well in Linux. CD-RW drive there is ATAPI. Tom _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"