cu -l /dev/cuaa4 did not work, but it pointed me in the right
I did an ls -l /dev/cuaa4 and it was not there.
This is what I think is happening. When the boot probe process finds
an PCI modem it automatically moves it to sio4 as the dmesg.boot
file shows. The problem is that the /dev table only contains cuaa0
thru cuaa3. When the boot probe process moves the PCI modem to sio4
it should also create the cuaa4 device and it does now do that.
I corrected the problem by doing this
sh MAKEDEV cuaa4
ls -l /dev/cuaa4 now shows it's there
cu -l /dev/cuaa4 now working
but I want to use tip command so I edited /etc/remote and added to
the end of the file a line for com5 - cuaa4. now tip com5 connects
to my PCI modem.
As a side note user ppp connected to pci modem on device cuaa4
Thanks every body for the shove in the correct direction.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Joe Marcus
Sent: Tuesday, November 18, 2003 3:42 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED] ORG
Subject: Re: PCI modem on sio4
On Tue, 2003-11-18 at 15:33, fbsd_user wrote:
> FBSD 4.9 with GENERIC kernel found my PCI modem.
> The PC's bio's has all com ports disabled.
> The boot log shows this.
> sio0: <Lucent kermit based PCI Modem> port
> 0xe400-0xe407,0xe000-0xe0ff,0xdc00-0xdcff mem
> irq 3 at device 19.0 on pci0
> sio0: moving to sio4
> sio4: type 16550A
> This is an zoom modem model 2920. It has onboard DSP and
> What do I tell user ppp the modem's device is?
The device is /dev/cuaa4.
> How can I send Hayes AT commands to modem?
cu -l /dev/cuaa4
> [EMAIL PROTECTED] mailing list
> To unsubscribe, send any mail to
PGP Key : http://www.marcuscom.com/pgp.asc
[EMAIL PROTECTED] mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"