Well if you compiled it with WITH_OPTIMIZED_CFLAGS, I would check and see if works with out it.
On Mon, 08 Dec 2003 21:19:46 -0600 Reid Linnemann <[EMAIL PROTECTED]> wrote: > I'm attempting to get nq-glx or nq-sgl (I don't know what their differences > are) to run on a FreeBSD4.9-STABLE box using a Radeon 7200 chip. > > I've got my X Server configured correctly, DRI is functioning, glxgears makes > an indirect GLX context just fine, etc.. QuakeForge is able to get the context > and init the window, but then it just Does Not Like things. Here is the > console output from nq-sgl: > > ~>nq-sgl > Host_Init > Added packfile /usr/local/share/quakeforge/id1/pak0.pak (339 files) > UDP (IPv4) Initialized > 16.0 megabyte heap > libGL-DEBUG: vis=35,doublebuf=0,depth=16, rgba=1 > libGL-DEBUG: vis=36,doublebuf=0,depth=16, rgba=1 > libGL-DEBUG: vis=37,doublebuf=0,depth=16, rgba=1 > libGL-DEBUG: vis=38,doublebuf=0,depth=16, rgba=1 > libGL-DEBUG: vis=39,doublebuf=1,depth=16, rgba=1 > libGL-DEBUG: vis=40,doublebuf=1,depth=16, rgba=1 > libGL-DEBUG: vis=41,doublebuf=1,depth=16, rgba=1 > libGL-DEBUG: vis=42,doublebuf=1,depth=16, rgba=1 > libGL-DEBUG: vis=43,doublebuf=0,depth=16, rgba=1 > libGL-DEBUG: vis=44,doublebuf=0,depth=16, rgba=1 > libGL-DEBUG: vis=45,doublebuf=0,depth=16, rgba=1 > libGL-DEBUG: vis=46,doublebuf=0,depth=16, rgba=1 > libGL-DEBUG: vis=47,doublebuf=1,depth=16, rgba=1 > libGL-DEBUG: vis=48,doublebuf=1,depth=16, rgba=1 > libGL-DEBUG: vis=49,doublebuf=1,depth=16, rgba=1 > libGL-DEBUG: vis=50,doublebuf=1,depth=16, rgba=1 > @@Created GLX Context.. > GL_VERSION: 1.3 Mesa 4.0.4 > GL_VENDOR: Mesa project: www.mesa3d.org > GL_RENDERER: Mesa GLX Indirect > GL_EXTENSIONS: > Checking for multitexture: not found. > Checking for 8-bit extension: disabled. > Video mode 640x480 initialized. > Particles: 3000 maximum vertex elements. > Sprites: 4 maximum vertex elements. > Text: 3000 maximum vertex elements. > > Sound Initialization > Not loading CD due to no driver > JOY: Joystick not found. > X Error of failed request: GLXBadRenderRequest > Major opcode of failed request: 157 (GLX) > Minor opcode of failed request: 1 (X_GLXRender) > Serial number of failed request: 91 > Current serial number in output stream: 100 > > Now nq-glx does the same thing, only it caps cpu usage after checking off 3000 > max vertex elements for particles, and appears to do nothing. It will > eventually spit out the next two lines of output, and then death becomes her. > > For reference, here is dmesg - and I am attaching the XF86Config. > > Timecounter "i8254" frequency 1193182 Hz > CPU: AMD Athlon(tm) Processor (800.03-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x622 Stepping = 2 > > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P > AT,PSE36,MMX,FXSR> > AMD Features=0xc0400000<AMIE,DSP,3DNow!> > real memory = 268419072 (262128K bytes) > avail memory = 256282624 (250276K bytes) > Preloaded elf kernel "kernel" at 0xc04f4000. > Preloaded elf module "splash_pcx.ko" at 0xc04f409c. > Preloaded elf module "vesa.ko" at 0xc04f4140. > Preloaded splash_image_data "/boot/hautlos.pcx" at 0xc04f41dc. > Preloaded elf module "linux.ko" at 0xc04f422c. > VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc04d2282 (1000022) > VESA: ATI RAGE128 > Pentium Pro MTRR support enabled > md0: Malloc disk > Using $PIR table, 8 entries at 0xc00f0ea0 > apm0: <APM BIOS> on motherboard > apm0: found APM BIOS v1.2, connected at v1.2 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe7ffffff > at device 0.0 on pci0 > pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on > pci0 pci1: <PCI bus> on pcib2 > drm0: <ATI Radeon QD R100> port 0xd800-0xd8ff mem > 0xd7000000-0xd707ffff,0xd8000000-0xdfffffff irq 11 at device 0.0 on pci1 > info: [drm] AGP at 0xe0000000 128MB > info: [drm] Initialized radeon 1.8.0 20020828 on minor 0 > isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 82C686 ATA66 controller> port 0xb800-0xb80f at device 4.1 on > pci0 ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on > pci0 usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 9 at device 4.3 on > pci0 usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 4.4 > pcm0: <AudioPCI ES1370> port 0x9400-0x943f irq 5 at device 10.0 on pci0 > rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xd6800000-0xd68000ff > irq 10 at device 11.0 on pci0 > rl0: Ethernet address: 00:e0:7d:e2:df:03 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl1: <RealTek 8139 10/100BaseTX> port 0x8800-0x88ff mem 0xd6000000-0xd60000ff > irq 11 at device 12.0 on pci0 > rl1: Ethernet address: 00:e0:7d:e3:2c:74 > miibus1: <MII bus> on rl1 > rlphy1: <RealTek internal media interface> on miibus1 > rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > ahc0: <Adaptec 2930CU SCSI adapter> port 0x8400-0x84ff mem > 0xd5800000-0xd5800fff irq 9 at device 13.0 on pci0 > aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs > pcib1: <Host to PCI bridge> on motherboard > pci2: <PCI bus> on pcib1 > orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcc000-0xd07ff on isa0 > pmtimer0 on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: IEEE1284 device found /NIBBLE > Probing for PnP devices on ppbus0: > ppbus0: <Hewlett-Packard HP LaserJet 4P> HP ENHANCED PCL5,PJL > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Polled port > ppi0: <Parallel I/O> on ppbus0 > pca0 at port 0x40 on isa0 > IP packet filtering initialized, divert enabled, rule-based forwarding > enabled, default to accept, logging disabled > IPsec: Initialized Security Association Processing. > ad0: 10300MB <FUJITSU MPD3108AT> [20928/16/63] at ata0-master UDMA33 > acd0: CDROM <LTN242> at ata1-master PIO4 > Waiting 15 seconds for SCSI devices to settle > Mounting root from ufs:/dev/ad0s1a > da1 at ahc0 bus 0 target 1 lun 0 > da1: <QUANTUM TRB730S 043C> Fixed Direct Access SCSI-2 device > da1: 10.000MB/s transfers (10.000MHz, offset 8) > da1: 699MB (1431760 512 byte sectors: 64H 32S/T 699C) > da0 at ahc0 bus 0 target 0 lun 0 > da0: <COMPAQ ST32171N 0388> Fixed Direct Access SCSI-2 device > da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled > da0: 2006MB (4110000 512 byte sectors: 255H 63S/T 255C) > _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"