> > Greetings, > I have a box with 5.1-release on it. I had it configured and > connected to my lan. The connection was to a switch. > ifconfig -a showed it as autosense. All was well with the > world. Relocated this box to another building (same lan). > It is connected to a 10/100 hub. Connected it and no joy. > Wouldn't talk over the network. Double checked everything. > Then I thought maybe autosense wasn't working so well. > Manually configured it ifconfig xl0 192.168.1.73 netmask > 255.255.255.0 media 100basetx mediaopt half-duplex. > > That didn't help. Double checked the hub and the port was > enabled. Replaced the drop cable. Nope. Not gonna go. Get > a no route to host. > > I would appreciate ideas here. >
My guess is that you need a gateway setup. Try doing something like 'route add default xxx.xxx.xxx.xxx' where the xxx's represent your gateway ip. I am not entirely sure if I have the syntax of route add done correctly, so check with your local man page first. HTH _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
