On Thu, 17 Mar 2005 11:21:44 -0500, John A. <[EMAIL PROTECTED]> wrote: > The system uses a standard installation. I have only configured the > ethernet card with the proper ip address for the wireless side of the > network. The windoze box is running M$ firewall, but it works fine > and allows me to ping my gateway and the FBSD box. What concerns me > at this point is the fact that tcpdump takes so long to respond. If I > let it run, it will display a packet about one every 2 min. They seem > to be in time order with timestamps only ms apart. > > Let me know if any other information will help. > > John A.
First, you have to excuse my English it is my third language and I do not have that much experience. This seems like a puzzle to me and I cannot figure out the topology of your network. * Can you ping the M$ box from FreeBSD? You need to enable incoming echo request in M$ firewall. * Are both systems on the same subnet? * Have you tried to plug the radio directly into FreeBSD box and test the connection like you did for M$ box? * Does your FreeBSD box have a firewall configured? You mentioned that the connection works if you plug the radio directly to M$ box. Does it also work when you plug both to the hub? If not then it might be a crossover cable problem. As you can see, many pices in this puzzle need sorting out. -- Kind regards Abu Khaled _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
