Hey,
I installed 4.0-RELEASE, upgraded it to STABLE and my SB16 still
doesn't work. This problem has been the same from the beginning.
I have tried pcm and sbc in kernel config, which from sbc has output in
dmesg (all
settings correct). I have also done all the necessary device nodes.
Kernel compiles without any problems. Everything seems to be ok, but no
sound.
line in kernel config:
device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15
dmesg output:
sbc0: <Soundblaster 16> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on
isa0
sbc0: setting card to irq 5, drq 1, 5
i think this is ok too (all the snd-devices has similar rights):
lrwxr-xr-x 1 root wheel 4 May 28 19:26 /dev/dsp -> dsp0
crw-rw-rw- 1 root wheel 30, 3 May 28 19:02 /dev/dsp0
I have also tried dsp1 with similar rights but it has the same output:
with mpg123:
Can't open /dev/dsp!
with xmixer:
/dev/mixer: Device not configured
with x11amp:
Unable to open the audio device
I can't think of anything I should do differently. The soundcard works
proberly in
w9x so it isn't physically broken.
If anyone has any idea what I should try, please let me know.
--
Simo Kaartinen
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
