Simo Kaartinen wrote:
>
> Hey,
>
> I installed 4.0-RELEASE, upgraded it to STABLE and my SB16 still
> doesn't work. This problem has been the same from the beginning.
>
> I have tried pcm and sbc in kernel config, which from sbc has output in
> dmesg (all
> settings correct). I have also done all the necessary device nodes.
>
> Kernel compiles without any problems. Everything seems to be ok, but no
> sound.
>
> line in kernel config:
> device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15
>
> dmesg output:
> sbc0: <Soundblaster 16> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on
> isa0
> sbc0: setting card to irq 5, drq 1, 5
>
> i think this is ok too (all the snd-devices has similar rights):
> lrwxr-xr-x 1 root wheel 4 May 28 19:26 /dev/dsp -> dsp0
> crw-rw-rw- 1 root wheel 30, 3 May 28 19:02 /dev/dsp0
>
> I have also tried dsp1 with similar rights but it has the same output:
>
> with mpg123:
> Can't open /dev/dsp!
> with xmixer:
> /dev/mixer: Device not configured
> with x11amp:
> Unable to open the audio device
>
> I can't think of anything I should do differently. The soundcard works
> proberly in
> w9x so it isn't physically broken.
>
> If anyone has any idea what I should try, please let me know.
You need to
cd /dev
./MAKEDEV snd0
Then check to see if you have a mixer. The make device links things
such as the mixer.
Kent
>
> --
> Simo Kaartinen
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-stable" in the body of the message
--
Kent Stewart
Richland, WA
mailto:[EMAIL PROTECTED]
http://www.3-cities.com/~kstewart/index.html
FreeBSD News http://daily.daemonnews.org/
SETI(Search for Extraterrestrial Intelligence) @ HOME
http://setiathome.ssl.berkeley.edu/
Hunting Archibald Stewart, b 1802 in Ballymena, Antrim Co., NIR
http://www.3-cities.com/~kstewart/genealogy/archibald_stewart.html
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
