Hi,
Can you please try this patch?
I can't commit it until STABLE is unfrozen after 7.2-RELEASE is cut.
Sam Leffler wrote:
Bruce Simpson wrote:
Hi,
Looks like I'm late to the party. I was responsible for committing these
ath(4) changes to RELENG_7.
I can't remember if I tested the kernel compile without the
AH_SUPPORT_AR5416 option or not, I have been so incredibly busy.
...
ru had a change to fix this but decided not to; can't say why.
Otherwise there is a better way to fix this which I alluded to in
previous mail--use the config-generated #define that is generated for
the "ath_hal" device.
thanks,
BMS
Index: UPDATING
===================================================================
--- UPDATING (revision 191718)
+++ UPDATING (working copy)
@@ -8,6 +8,11 @@
/usr/ports/UPDATING. Please read that file before running
portupgrade.
+20090505:
+ The kernel compile-time option AH_SUPPORT_AR5416 has been
+ removed; it is now enabled by default as if_ath.c depends on it
+ in order to build.
+
20090504:
FreeBSD 7.2-RELEASE
Index: sys/arm/conf/AVILA
===================================================================
--- sys/arm/conf/AVILA (revision 191718)
+++ sys/arm/conf/AVILA (working copy)
@@ -133,7 +133,6 @@
#device wlan_tkip # 802.11 TKIP support
device ath # Atheros pci/cardbus NIC's
device ath_hal # Atheros HAL (Hardware Access Layer)
-options AH_SUPPORT_AR5416 # enable AR5416 tx/rx
descriptors
device ath_rate_sample # SampleRate tx rate control for ath
options ATH_DEBUG
Index: sys/sparc64/conf/GENERIC
===================================================================
--- sys/sparc64/conf/GENERIC (revision 191718)
+++ sys/sparc64/conf/GENERIC (working copy)
@@ -191,7 +191,6 @@
device wlan_scan_sta # 802.11 STA mode scanning
device ath # Atheros pci/cardbus NIC's
device ath_hal # Atheros HAL (Hardware Access Layer)
-options AH_SUPPORT_AR5416 # enable AR5416 tx/rx
descriptors
device ath_rate_sample # SampleRate tx rate control for ath
# Pseudo devices.
Index: sys/conf/options
===================================================================
--- sys/conf/options (revision 191718)
+++ sys/conf/options (working copy)
@@ -731,8 +731,6 @@
ATH_TX99_DIAG opt_ath.h
# options for the Atheros hal
-AH_SUPPORT_AR5416 opt_ah.h
-
AH_DEBUG opt_ah.h
AH_ASSERT opt_ah.h
AH_DEBUG_ALQ opt_ah.h
Index: sys/modules/ath/Makefile
===================================================================
--- sys/modules/ath/Makefile (revision 191718)
+++ sys/modules/ath/Makefile (working copy)
@@ -76,8 +76,9 @@
#
# AR5416, AR9160 support; these are 11n parts but only really
# supported (right now) operating in legacy mode. Note enabling
-# this support requires defining AH_SUPPORT_AR5416 in opt_ah.h
+# this support requires defining AH_SUPPORT_AR5416
# so the 11n tx/rx descriptor format is handled.
+# This support is now enabled by default.
#
# NB: 9160 depends on 5416 but 5416 does not require 9160
#
@@ -106,7 +107,4 @@
CFLAGS+= -I. -I${.CURDIR}/../../dev/ath -I${.CURDIR}/../../dev/ath/ath_hal
-opt_ah.h:
- echo '#define AH_SUPPORT_AR5416 1' > $@
-
.include <bsd.kmod.mk>
Index: sys/dev/ath/ath_hal/ah_desc.h
===================================================================
--- sys/dev/ath/ath_hal/ah_desc.h (revision 191718)
+++ sys/dev/ath/ath_hal/ah_desc.h (working copy)
@@ -20,8 +20,12 @@
#ifndef _DEV_ATH_DESC_H
#define _DEV_ATH_DESC_H
-#include "opt_ah.h" /* NB: required for AH_SUPPORT_AR5416 */
+#include "opt_ah.h"
+#ifndef AH_SUPPORT_AR5416
+#define AH_SUPPORT_AR5416 /* always support AR5416 */
+#endif
+
/*
* Transmit descriptor status. This structure is filled
* in only after the tx descriptor process method finds a
Index: sys/dev/ath/if_ath.c
===================================================================
--- sys/dev/ath/if_ath.c (revision 191718)
+++ sys/dev/ath/if_ath.c (working copy)
@@ -3399,7 +3399,7 @@
rix = rs->rs_rate;
sc->sc_rx_th.wr_rate = sc->sc_hwmap[rix].ieeerate;
sc->sc_rx_th.wr_flags = sc->sc_hwmap[rix].rxflags;
-#if HAL_ABI_VERSION >= 0x07050400
+#if HAL_ABI_VERSION >= 0x07050400 && defined(AH_SUPPORT_AR5416)
if (sc->sc_curchan.channelFlags & CHANNEL_HT) {
/*
* For HT operation we must specify the channel
Index: sys/i386/conf/GENERIC
===================================================================
--- sys/i386/conf/GENERIC (revision 191718)
+++ sys/i386/conf/GENERIC (working copy)
@@ -255,7 +255,6 @@
device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros pci/cardbus NIC's
device ath_hal # Atheros HAL (Hardware Access Layer)
-options AH_SUPPORT_AR5416 # enable AR5416 tx/rx
descriptors
device ath_rate_sample # SampleRate tx rate control for ath
device awi # BayStack 660 and others
device ral # Ralink Technology RT2500 wireless NICs.
Index: sys/amd64/conf/GENERIC
===================================================================
--- sys/amd64/conf/GENERIC (revision 191718)
+++ sys/amd64/conf/GENERIC (working copy)
@@ -242,7 +242,6 @@
device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros pci/cardbus NIC's
device ath_hal # Atheros HAL (Hardware Access Layer)
-options AH_SUPPORT_AR5416 # enable AR5416 tx/rx
descriptors
device ath_rate_sample # SampleRate tx rate control for ath
device awi # BayStack 660 and others
device ral # Ralink Technology RT2500 wireless NICs.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
