Alexander Motin wrote:
Steve Polyack wrote:
I'm about to try today's head and patch. I'll let you know how it goes.
Ok. Just to be sure it is not cabling issue (I have seen such), try also
limit port speed to 1.5Gbps by adding to loader.conf:
hint.siisch.0.sata_rev=1
hint.siisch.1.sata_rev=1
hint.siisch.2.sata_rev=1
hint.siisch.3.sata_rev=1
Here's a dmesg from todays head and your patch from this morning. It's
still only sensing one disk over the two PMs. Forcing SATA1/1.5Gbps
operation didn't change anything.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #4: Mon Oct 26 10:01:55 EDT 2009
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff809e7000.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff809e7260.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2133419836 Hz
CPU: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz (2133.42-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4299161600 (4100 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000093fff, 602112 bytes (147 pages)
0x0000000000a16000 - 0x00000000b60fffff, 3043926016 bytes (743146 pages)
0x00000000bf78e000 - 0x00000000bf78ffff, 8192 bytes (2 pages)
0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages)
avail memory = 4095377408 (3905 MB)
ACPI APIC Table: <061909 APIC1420>
INTR: Adding local APIC 18 as a target
INTR: Adding local APIC 20 as a target
INTR: Adding local APIC 22 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 16
cpu1 (AP): APIC ID: 18
cpu2 (AP): APIC ID: 20
cpu3 (AP): APIC ID: 22
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0xfa710 00024 (v2 ACPIAM)
ACPI: XSDT 0xbf790100 0008C (v1 NEC 20090619 MSFT 00000097)
ACPI: FACP 0xbf790290 000F4 (v4 061909 FACP1420 20090619 MSFT 00000097)
ACPI: DSDT 0xbf790670 05B8F (v2 10006 10006000 00000000 INTL 20051117)
ACPI: FACS 0xbf79e000 00040
ACPI: APIC 0xbf790390 000D2 (v2 061909 APIC1420 20090619 MSFT 00000097)
ACPI: MCFG 0xbf790470 0003C (v1 061909 OEMMCFG 20090619 MSFT 00000097)
ACPI: SLIC 0xbf7904b0 00176 (v1 NEC 20090619 MSFT 00000097)
ACPI: ERST 0xbf790630 00040 (v1 061909 WHEA1420 20090619 MSFT 00000097)
ACPI: OEMB 0xbf79e040 0007B (v1 061909 OEMB1420 20090619 MSFT 00000097)
ACPI: HPET 0xbf79a670 00038 (v1 061909 OEMHPET 20090619 MSFT 00000097)
ACPI: DMAR 0xbf79e0c0 00120 (v1 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 0xbf79efb0 00363 (v1 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: EINJ 0xbf79a6b0 00130 (v1 AMIER AMI_EINJ 20090619 MSFT 00000097)
ACPI: BERT 0xbf79a840 00030 (v1 AMIER AMI_BERT 20090619 MSFT 00000097)
ACPI: ERST 0xbf79a870 001B0 (v1 AMIER AMI_ERST 20090619 MSFT 00000097)
ACPI: HEST 0xbf79aa20 000A8 (v1 AMIER AMI_HEST 20090619 MSFT 00000097)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x10000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
acpi0: <NEC > on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 16 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
ACPI timer: 1/1 1/0 1/0 1/2 0/459 1/2 1/0 1/0 1/0 1/0 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 6 7 10 11 12 14 15
Validation 0 15 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 14 N 0 3 4 6 7 10 11 12 14 15
Validation 0 14 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 6 7 10 11 12 14 15
Validation 0 7 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 6 N 0 3 4 6 7 10 11 12 14 15
Validation 0 6 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfed40000-0xfed44fff on
acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x3403, revid=0x13
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
found-> vendor=0x8086, dev=0x3408, revid=0x13
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
found-> vendor=0x8086, dev=0x340a, revid=0x13
domain=0, bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
found-> vendor=0x8086, dev=0x340e, revid=0x13
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
found-> vendor=0x8086, dev=0x3410, revid=0x13
domain=0, bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
found-> vendor=0x8086, dev=0x342e, revid=0x13
domain=0, bus=0, slot=20, func=0
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3422, revid=0x13
domain=0, bus=0, slot=20, func=1
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3423, revid=0x13
domain=0, bus=0, slot=20, func=2
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3438, revid=0x13
domain=0, bus=0, slot=20, func=3
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3430, revid=0x13
domain=0, bus=0, slot=22, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfacfc000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3431, revid=0x13
domain=0, bus=0, slot=22, func=1
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfacf8000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3432, revid=0x13
domain=0, bus=0, slot=22, func=2
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfacf4000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3433, revid=0x13
domain=0, bus=0, slot=22, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=14
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfacf0000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3429, revid=0x13
domain=0, bus=0, slot=22, func=4
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xfacec000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x342a, revid=0x13
domain=0, bus=0, slot=22, func=5
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xface8000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x342b, revid=0x13
domain=0, bus=0, slot=22, func=6
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xface4000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x342c, revid=0x13
domain=0, bus=0, slot=22, func=7
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=14
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xface0000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a37, revid=0x00
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0xbc00, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a38, revid=0x00
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
map[20]: type I/O Port, range 32, base 0xb880, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x3a39, revid=0x00
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=14
map[20]: type I/O Port, range 32, base 0xb800, size 5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a3c, revid=0x00
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfacde000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfacde000
found-> vendor=0x8086, dev=0x3a3e, revid=0x00
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=6
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfacd8000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x3a40, revid=0x00
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3a48, revid=0x00
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3a4a, revid=0x00
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a34, revid=0x00
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0xb480, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x3a35, revid=0x00
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=14
map[20]: type I/O Port, range 32, base 0xb400, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a36, revid=0x00
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[20]: type I/O Port, range 32, base 0xb080, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a3a, revid=0x00
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfacdc000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfacdc000
found-> vendor=0x8086, dev=0x244e, revid=0x90
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a16, revid=0x00
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a22, revid=0x00
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=14
powerspec 3 supports D0 D3 current D0
MSI supports 16 messages
map[10]: type I/O Port, range 32, base 0xb000, size 3, enabled
map[14]: type I/O Port, range 32, base 0xac00, size 2, enabled
map[18]: type I/O Port, range 32, base 0xa880, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xa800, size 2, enabled
map[20]: type I/O Port, range 32, base 0xa480, size 5, enabled
map[24]: type Memory, range 32, base 0xfacd2000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a30, revid=0x00
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[10]: type Memory, range 64, base 0xfacd0000, size 8, enabled
map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 4
pcib3: I/O decode 0xc000-0xcfff
pcib3: memory decode 0xfad00000-0xfadfffff
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x12d8, dev=0xe111, revid=0x02
domain=0, bus=3, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: <PCI-PCI bridge> irq 16 at device 0.0 on pci3
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xc000-0xcfff
pcib4: memory decode 0xfad00000-0xfadfffff
pcib4: no prefetched decode
pci4: <PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x1095, dev=0x3124, revid=0x01
domain=0, bus=4, slot=4, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x01df, statreg=0x02b0, cachelnsz=64 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfadfe000, size 7, enabled
pcib4: requested memory range 0xfadfe000-0xfadfe07f: good
pcib3: requested memory range 0xfadfe000-0xfadfe07f: good
map[18]: type Memory, range 64, base 0xfadf0000, size 15, enabled
pcib4: requested memory range 0xfadf0000-0xfadf7fff: good
pcib3: requested memory range 0xfadf0000-0xfadf7fff: good
map[20]: type I/O Port, range 32, base 0xcc00, size 4, enabled
pcib4: requested I/O range 0xcc00-0xcc0f: in range
pcib3: requested I/O range 0xcc00-0xcc0f: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: slot 4 INTA is routed to irq 16
siis0: <SiI3124 SATA2 controller> port 0xcc00-0xcc0f mem
0xfadfe000-0xfadfe07f,0xfadf0000-0xfadf7fff irq 16 at device 4.0 on pci4
siis0: Reserved 0x80 bytes for rid 0x10 type 3 at 0xfadfe000
siis0: Reserved 0x8000 bytes for rid 0x18 type 3 at 0xfadf0000
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 16 vector 49
siis0: [MPSAFE]
siis0: [ITHREAD]
siisch0: <SIIS channel> at channel 0 on siis0
siisch0: [MPSAFE]
siisch0: [ITHREAD]
siisch1: <SIIS channel> at channel 1 on siis0
siisch1: [MPSAFE]
siisch1: [ITHREAD]
siisch2: <SIIS channel> at channel 2 on siis0
siisch2: [MPSAFE]
siisch2: [ITHREAD]
siisch3: <SIIS channel> at channel 3 on siis0
siisch3: [MPSAFE]
siisch3: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0x0-0x0
pcib5: no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver
attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 16 at device 26.0
on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1
on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb880
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 16 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 19 at device 26.2
on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 16 vector 51
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfacde000-0xfacde3ff irq 18 at
device 26.7 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 16 vector 52
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x0-0x0
pcib6: no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib7: domain 0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0xd000-0xdfff
pcib7: memory decode 0xfae00000-0xfaefffff
pcib7: no prefetched decode
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
found-> vendor=0x8086, dev=0x10d3, revid=0x00
domain=0, bus=7, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 5 messages in map 0x1c
map[10]: type Memory, range 32, base 0xfaee0000, size 17, enabled
pcib7: requested memory range 0xfaee0000-0xfaefffff: good
map[18]: type I/O Port, range 32, base 0xdc00, size 5, enabled
pcib7: requested I/O range 0xdc00-0xdc1f: in range
map[1c]: type Memory, range 32, base 0xfaedc000, size 14, enabled
pcib7: requested memory range 0xfaedc000-0xfaedffff: good
pcib7: matched entry for 7.0.INTA
pcib7: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xdc00-0xdc1f mem
0xfaee0000-0xfaefffff,0xfaedc000-0xfaedffff irq 16 at device 0.0 on pci7
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfaee0000
em0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfaedc000
em0: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 256 to local APIC 16 vector 53
msi: routing MSI-X IRQ 257 to local APIC 16 vector 54
msi: routing MSI-X IRQ 258 to local APIC 16 vector 55
em0: using IRQs 256-258 for MSI-X
em0: Using MSIX interrupts
em0: [MPSAFE]
em0: [ITHREAD]
em0: [MPSAFE]
em0: [ITHREAD]
em0: [MPSAFE]
em0: [ITHREAD]
em0: bpf attached
em0: Ethernet address: 00:30:48:db:7d:9e
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib8: domain 0
pcib8: secondary bus 8
pcib8: subordinate bus 8
pcib8: I/O decode 0xe000-0xefff
pcib8: memory decode 0xfaf00000-0xfaffffff
pcib8: no prefetched decode
pci8: <ACPI PCI bus> on pcib8
pci8: domain=0, physical bus=8
found-> vendor=0x8086, dev=0x10d3, revid=0x00
domain=0, bus=8, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 5 messages in map 0x1c
map[10]: type Memory, range 32, base 0xfafe0000, size 17, enabled
pcib8: requested memory range 0xfafe0000-0xfaffffff: good
map[18]: type I/O Port, range 32, base 0xec00, size 5, enabled
pcib8: requested I/O range 0xec00-0xec1f: in range
map[1c]: type Memory, range 32, base 0xfafdc000, size 14, enabled
pcib8: requested memory range 0xfafdc000-0xfafdffff: good
pcib8: matched entry for 8.0.INTA
pcib8: slot 0 INTA hardwired to IRQ 17
em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xec00-0xec1f mem
0xfafe0000-0xfaffffff,0xfafdc000-0xfafdffff irq 17 at device 0.0 on pci8
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfafe0000
em1: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfafdc000
em1: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 259 to local APIC 16 vector 56
msi: routing MSI-X IRQ 260 to local APIC 16 vector 57
msi: routing MSI-X IRQ 261 to local APIC 16 vector 58
em1: using IRQs 259-261 for MSI-X
em1: Using MSIX interrupts
em1: [MPSAFE]
em1: [ITHREAD]
em1: [MPSAFE]
em1: [ITHREAD]
em1: [MPSAFE]
em1: [ITHREAD]
em1: bpf attached
em1: Ethernet address: 00:30:48:db:7d:9f
uhci3: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 23 at device 29.0
on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb480
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 16 vector 59
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x3f00
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1
on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 18 at device 29.2
on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb080
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfacdc000-0xfacdc3ff irq 23 at
device 29.7 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib9: domain 0
pcib9: secondary bus 9
pcib9: subordinate bus 9
pcib9: I/O decode 0xf000-0xfff
pcib9: memory decode 0xfb000000-0xfbefffff
pcib9: prefetched decode 0xf9000000-0xf9ffffff
pcib9: Subtractively decoded bridge.
pci9: <ACPI PCI bus> on pcib9
pci9: domain=0, physical bus=9
found-> vendor=0x102b, dev=0x0532, revid=0x0a
domain=0, bus=9, slot=1, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=64 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=15
powerspec 1 supports D0 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xf9000000, size 24,
enabled
pcib9: requested memory range 0xf9000000-0xf9ffffff: good
map[14]: type Memory, range 32, base 0xfbefc000, size 14, enabled
pcib9: requested memory range 0xfbefc000-0xfbefffff: good
map[18]: type Memory, range 32, base 0xfb000000, size 23, enabled
pcib9: requested memory range 0xfb000000-0xfb7fffff: good
pcib9: matched entry for 9.1.INTA
pcib9: slot 1 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> mem
0xf9000000-0xf9ffffff,0xfbefc000-0xfbefffff,0xfb000000-0xfb7fffff irq 18 at
device 1.0 on pci9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI controller> port
0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa49f mem
0xfacd2000-0xfacd27ff irq 19 at device 31.2 on pci0
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfacd2000
ahci0: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 262 to local APIC 16 vector 64
ahci0: using IRQ 262 for MSI
ahci0: [MPSAFE]
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM eSATA
6ports
ahci0: Caps2:
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [MPSAFE]
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [MPSAFE]
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [MPSAFE]
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [MPSAFE]
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [MPSAFE]
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [MPSAFE]
ahcich5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
Calling int 0x15 (ax=0xc000 bx=0x0000 cx=0x0000 dx=0x0000 es=0x0000 di=0x0000)
Exiting int 0x15 (ax=0x0000 bx=0xe712 cx=0x0000 dx=0x0000 es=0xf000 di=0x0000)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 60
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 16 vector 61
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 16 vector 62
uart1: [FILTER]
uart1: fast interrupt
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 6E, should be 6B
(20091013/tbutils-354)
ACPI: SSDT 0xbf79e1e0 008F0 (v1 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT 0xbf79ead0 004D5 (v1 PmRef P001Cst 00003001 INTL 20051117)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (15, 16)
est0: Invalid freq 2000, ignored.
est0: Invalid id16 (set, cur) = (14, 16)
est0: Invalid freq 1867, ignored.
est0: Invalid id16 (set, cur) = (13, 16)
est0: Invalid freq 1733, ignored.
est0: Invalid id16 (set, cur) = (12, 16)
est0: Invalid freq 1600, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (15, 16)
est1: Invalid freq 2000, ignored.
est1: Invalid id16 (set, cur) = (14, 16)
est1: Invalid freq 1867, ignored.
est1: Invalid id16 (set, cur) = (13, 16)
est1: Invalid freq 1733, ignored.
est1: Invalid id16 (set, cur) = (12, 16)
est1: Invalid freq 1600, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (15, 16)
est2: Invalid freq 2000, ignored.
est2: Invalid id16 (set, cur) = (14, 16)
est2: Invalid freq 1867, ignored.
est2: Invalid id16 (set, cur) = (13, 16)
est2: Invalid freq 1733, ignored.
est2: Invalid id16 (set, cur) = (12, 16)
est2: Invalid freq 1600, ignored.
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (15, 16)
est3: Invalid freq 2000, ignored.
est3: Invalid id16 (set, cur) = (14, 16)
est3: Invalid freq 1867, ignored.
est3: Invalid id16 (set, cur) = (13, 16)
est3: Invalid freq 1733, ignored.
est3: Invalid id16 (set, cur) = (12, 16)
est3: Invalid freq 1600, ignored.
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi0: wakeup code va 0xffffff8077774000 pa 0x4000
isa_probe_children: disabling PnP devices
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 257519 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66669369 hz
Timecounter "TSC" frequency 2133419836 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attachedsiisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: device reset time=0ms
siisch0: SATA connect time=0ms status=00000113
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch2: CONNECT requested
siisch2: SIIS reset...
siisch2: device reset time=0ms
siisch2: SATA connect time=0ms status=00000113
siisch2: ready wait time=0ms
siisch2: SIIS reset done: devices=00000001
Waiting 15 seconds for SCSI devices to settle
siisch0: SIIS reset...
siisch0: device reset time=1ms
siisch0: SATA connect time=0ms status=00000113
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch1: SIIS reset...
siisch1: device reset time=1ms
siisch1: SATA connect timeout status=00000000
siisch1: SIIS reset done: phy reset found no device
siisch2: SIIS reset...
siisch2: device reset time=1ms
siisch2: SATA connect time=0ms status=00000113
siisch2: ready wait time=0ms
siisch2: SIIS reset done: devices=00000001
siisch3: SIIS reset...
siisch3: device reset time=1ms
siisch3: SATA connect timeout status=00000000
siisch3: SIIS reset done: phy reset found no device
ahcich0: AHCI reset...
ahcich0: hardware reset ...
ahcich0: SATA connect timeout status=00000000
ahcich0: AHCI reset done: phy reset found no device
ahcich1: AHCI reset...
ahcich1: hardware reset ...
ahcich1: SATA connect time=0ms status=00000123
ahcich1: ready wait time=4ms
ahcich1: AHCI reset done: device found
ahcich2: AHCI reset...
ahcich2: hardware reset ...
ahcich2: SATA connect timeout status=00000000
ahcich2: AHCI reset done: phy reset found no device
ahcich3: AHCI reset...
ahcich3: hardware reset ...
ahcich3: SATA connect timeout status=00000000
ahcich3: AHCI reset done: phy reset found no device
ahcich4: AHCI reset...
ahcich4: hardware reset ...
ahcich4: SATA connect timeout status=00000000
ahcich4: AHCI reset done: phy reset found no device
ahcich5: AHCI reset...
ahcich5: hardware reset ...
ahcich5: SATA connect timeout status=00000000
ahcich5: AHCI reset done: phy reset found no device
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ipmi0: IPMI device rev. 1, firmware rev. 1.2, version 2.0
ipmi0: Number of channels 0
ipmi0: Attached watchdog
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen1.2: <Winbond Electronics Corp> at usbus1
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev
1.10/0.01, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev
1.10/0.01, addr 2> on usbus1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
(aprobe0:siisch0:0:15:0): SIGNATURE: 9669
PM Product ID: 37261095
PM Revision: 00001706
(aprobe2:siisch2:0:15:0): SIGNATURE: 9669
PM Product ID: 37261095
PM Revision: 00001706
(aprobe5:ahcich1:0:0:0): SIGNATURE: 0000
pmp0 at siisch0 bus 0 scbus0 target 15 lun 0
pmp0: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pmp0: 150.000MB/s transfers
PM ports: 5
PM RESET 0
PM RESET 1
PM RESET 2
siisch0: SNTF 0x0000
siisch0: SNTF 0x0000
PM RESET 3
PM RESET 4
siisch0: SNTF 0x0000
siisch0: SNTF 0x0000
PM reset done
pmp1 at siisch2 bus 0 scbus2 target 15 lun 0
pmp1: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pmp1: 150.000MB/s transfers
PM ports: 5
PM RESET 0
PM RESET 1
PM RESET 2
PM RESET 3
PM RESET 4
PM reset done
GEOM: new disk ada0
ada0 at ahcich1 bus 0 scbus5 target 0 lun 0
ada0: <ST3320418AS CC35> ATA/ATAPI-8 SATA 2.x device
ada0: Serial Number 9VM1RYE5
ada0: 300.000MB/s transfers
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Native Command Queueing enabled
pass0 at siisch0 bus 0 scbus0 target 15 lun 0
pass0: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pass0: 150.000MB/s transfers
PM connect done
PM status: 0 - 00000123
PM status: 1 - 00000123
PM status: 2 - 00000123
PM status: 3 - 00000123
PM status: 4 - 00000123
pass1 at siisch2 bus 0 scbus2 target 15 lun 0
pass1: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pass1: 150.000MB/s transfers
pass2 at ahcich1 bus 0 scbus5 target 0 lun 0PM connect done
pass2: PM status: 0 - 00000123
<ST3320418AS CC35> ATA/ATAPI-8 SATA 2.x device
pass2: Serial Number 9VM1RYE5
pass2: 300.000MB/s transfers
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x12000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x16000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x14000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 18 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 20 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 22 vector 48
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 18 vector 49
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 20 vector 49
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 22 vector 49
msi: Assigning MSI-X IRQ 256 to local APIC 18 vector 50
msi: Assigning MSI-X IRQ 257 to local APIC 20 vector 50
msi: Assigning MSI-X IRQ 258 to local APIC 22 vector 50
msi: Assigning MSI-X IRQ 260 to local APIC 18 vector 51
msi: Assigning MSI-X IRQ 261 to local APIC 20 vector 51
msi: Assigning MSI IRQ 262 to local APIC 22 vector 51
GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
Trying to mount root from ufs:/dev/label/OS/rootfs
ct_to_ts([2009-10-26 10:16:33]) = 1256552193.000000000
start_init: trying /sbin/init
PM status: 1 - 00000000
PM status: 2 - 00000000
PM status: 3 - 00000000
PM status: 4 - 00000000
(aprobe1:siisch2:0:0:0): SIGNATURE: 0000
pass3 at siisch2 bus 0 scbus2 target 0 lun 0
pass3: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
pass3: Serial Number 9VS2FGFN
pass3: 150.000MB/s transfers
ada1 at siisch2 bus 0 scbus2 target 0 lun 0GEOM: new disk ada1
ada1:
<ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
ada1: Serial Number 9VS2FGFN
ada1: 150.000MB/s transfers
ada1: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada1: Native Command Queueing enabled
em0: Link is up 1000 Mbps Full Duplex
em0: link state changed to UP
siisch0: Timeout on slot 26
siisch0: siis_timeout is 00000000 ss 04000000 rs 04000000 es 00000000 sts
801a2000 serr 00000000
siisch0: ready wait time=0ms
siisch0: ready wait time=0ms
siisch0: SIIS reset...
siisch0: device reset time=1ms
siisch0: SATA connect time=0ms status=00000113
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
PMP freeze: 1
PMP freeze: 2
PMP freeze: 3
PMP freeze: 4
(aprobe0:siisch0:0:0:0): Command timed out
(aprobe0:siisch0:0:0:0): error 5
(aprobe0:siisch0:0:0:0): Retries Exhausted
PMP freeze: 0
PM ports: -1771503359
PM RESET 0
PM reset done
PM connect done
PMP release: 0
PMP release: 1
PMP release: 2
PMP release: 3
PMP release: 4
t_delta 15.fc765cbdba5b39c0 too short
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
