On Fri, Feb 4, 2011 at 4:13 AM, Damien Fleuriot <[email protected]> wrote: > I have a firewall with 2x Intel pro dual port cards. > > On Intel A , port 1 goes to switch 1, port 2 goes to switch 2 > On Intel B , port 1 goes to switch 1, port 2 goes to switch 2 > > I have created the following 2 lagg devices using LACP: > > lagg0 = A1 + B1 > lagg1 = A2 + B2 > > This works fine. > > Now, what I had in mind was creating a lagg2 device using lagg0 and > lagg1 with failover. > > That would provide redundancy in case of a switch failure.
Couple different options: - create a single lagg0 device using all port NIC ports - create your lagg0 using A1 + B2, and your lagg1 using A2+B1 Both of those will give you fail-over support for losing a single NIC port, an entire NIC, or an entire switch. Of course, if your switched aren't stacked to support LACP across them, then you will be limited to a single links bandwidth. But you will be extremely safe. :) -- Freddie Cash [email protected] _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
