I have an X9SCA-F board and recently updated the BIOS to version 2.0 (the .508 BIOS file). Its not the same board as yours but maybe the you have the same problem. When i downloaded the BIOS from the Supermicro website on May 23 the included AMI.BAT only updated the BIOS and not the Intel ME BIOS extension.
When i downloaded the file again 2 days ago the AMI.BAT was updated to also flash the Intel ME. Too bad the version number and the filename are still the same. I only got to know this after contacting their support. My problems were different though. Both of my nics were usable but were hanging after about 2 hours of heavy load but maybe your problem can be fixed with a new BIOS update. Sebastian Am 05.06.2012 um 18:46 schrieb Johan Hendriks: > hello all. > > i have a new board the supermicro X9SCM-F with the latest firmware 508. > I am having some trouble with the onboard intel nics. > It only activate one nic. > From dmesg > > em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xf020-0xf03f mem > 0xf7800000-0xf781ffff,0xf7825000-0xf7825fff irq 20 at device 25.0 on pci0 > em0: Using an MSI interrupt > em0: Setup of Shared code failed > device_attach: em0 attach returned 6 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7824000-0xf78243ff irq 16 > at device 26.0 on pci0 > usbus0: EHCI version 1.0 > usbus0: <EHCI (generic) USB 2.0 controller> on ehci0 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 > pci3: <ACPI PCI bus> on pcib3 > em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xd000-0xd01f mem > 0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci3 > em1: Using MSIX interrupts with 3 vectors > em1: Ethernet address: 00:25:90:75:c8:08 > > pciconf -vl > > em0@pci0:0:25:0: class=0x020000 card=0x00008086 chip=0x15038086 > rev=0x05 hdr=0x00 > vendor = 'Intel Corporation' > device = '82579V Gigabit Network Connection' > class = network > subclass = ethernet > > > em1@pci0:3:0:0: class=0x020000 card=0x000015d9 chip=0x10d38086 rev=0x00 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82574L Gigabit Network Connection' > class = network > subclass = ethernet > > I have anothe machine wich has 9.0 stable as of today, if i boot from that > disk, then it shows the above dmesg message with one difference that it > replaces em1 for em0 also. > > it then looks like so > > em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xf020-0xf03f mem > 0xf7800000-0xf781ffff,0xf7825000-0xf7825fff irq 20 at device 25.0 on pci0 > em0: Using an MSI interrupt > em0: Setup of Shared code failed > device_attach: em0 attach returned 6 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7824000-0xf78243ff irq 16 > at device 26.0 on pci0 > usbus0: EHCI version 1.0 > usbus0 on ehci0 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 > pci3: <ACPI PCI bus> on pcib3 > em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd000-0xd01f mem > 0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci3 > em0: Using MSIX interrupts with 3 vectors > em0: Ethernet address: 00:25:90:75:c8:08 > > So still one network card. > > Full dmesg from the 9.0-STABLE install. > > Copyright (c) 1992-2012 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.0-STABLE #0: Tue Jun 5 13:55:38 CEST 2012 > root@filer01.neuteboom.local:/usr/obj/usr/src/sys/KRNL amd64 > CPU: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (3093.05-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model = 2a Stepping = 7 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> > AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant, performance statistics > real memory = 34359738368 (32768 MB) > avail memory = 33077051392 (31544 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <SUPERM SMCI--MB> > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 2 > cpu2 (AP): APIC ID: 4 > cpu3 (AP): APIC ID: 6 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ctl: CAM Target Layer loaded > acpi0: <SUPERM SMCI--MB> on motherboard > acpi0: Power Button (fixed) > acpi0: reservation of 67, 1 (4) failed > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 550 > Event timer "HPET1" frequency 14318180 Hz quality 440 > Event timer "HPET2" frequency 14318180 Hz quality 440 > Event timer "HPET3" frequency 14318180 Hz quality 440 > Event timer "HPET4" frequency 14318180 Hz quality 440 > atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 > atrtc0: Warning: Couldn't map I/O. > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > mps0: <LSI SAS2008> port 0xe000-0xe0ff mem > 0xf7600000-0xf7603fff,0xf7580000-0xf75bffff irq 19 at device 0.0 on pci1 > mps0: Firmware: 13.00.57.00, Driver: 13.00.00.00-fbsd > mps0: IOCCapabilities: > 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> > em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xf020-0xf03f mem > 0xf7800000-0xf781ffff,0xf7825000-0xf7825fff irq 20 at device 25.0 on pci0 > em0: Using an MSI interrupt > em0: Setup of Shared code failed > device_attach: em0 attach returned 6 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7824000-0xf78243ff irq 16 > at device 26.0 on pci0 > usbus0: EHCI version 1.0 > usbus0 on ehci0 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 > pci3: <ACPI PCI bus> on pcib3 > em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd000-0xd01f mem > 0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci3 > em0: Using MSIX interrupts with 3 vectors > em0: Ethernet address: 00:25:90:75:c8:08 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7823000-0xf78233ff irq 23 > at device 29.0 on pci0 > usbus1: EHCI version 1.0 > usbus1 on ehci1 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > vgapci0: <VGA-compatible display> mem > 0xf5000000-0xf5ffffff,0xf7000000-0xf7003fff,0xf6800000-0xf6ffffff irq 19 at > device 3.0 on pci4 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci0: <Intel Cougar Point AHCI SATA controller> port > 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem > 0xf7822000-0xf78227ff irq 19 at device 31.2 on pci0 > ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_button0: <Power Button> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > acpi_tz1: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0 > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ppc0: cannot reserve I/O port range > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > ZFS filesystem version 5 > ZFS storage pool version 28 > Timecounters tick every 1.000 msec > ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based > forwarding disabled, default to deny, logging disabled > DUMMYNET 0 with IPv6 initialized (100409) > load_dn_sched dn_sched FIFO loaded > load_dn_sched dn_sched QFQ loaded > load_dn_sched dn_sched RR loaded > load_dn_sched dn_sched WF2Q+ loaded > load_dn_sched dn_sched PRIO loaded > usbus0: 480Mbps High Speed USB v2.0 > usbus1: 480Mbps High Speed USB v2.0 > ugen0.1: <Intel> at usbus0 > uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 > ugen1.1: <Intel> at usbus1 > uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > ugen0.2: <vendor 0x8087> at usbus0 > uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on > usbus0 > ugen1.2: <vendor 0x8087> at usbus1 > uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on > usbus1 > uhub2: 6 ports with 6 removable, self powered > uhub3: 6 ports with 6 removable, self powered > ses0 at mps0 bus 0 scbus0 target 8 lun 0 > ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device > ses0: 600.000MB/s transfers > ses0: Command Queueing enabled > ses0: SCSI-3 SES Device > ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 > ada0: <ST3808110AS 3.AJJ> ATA-7 SATA 1.x device > ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) > ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad4 > SMP: AP CPU #3 Launched! > SMP: AP CPU #1 Launched! > SMP: AP CPU #2 Launched! > Timecounter "TSC-low" frequency 12082230 Hz quality 1000 > Root mount waiting for: usbus0 > ugen0.3: <Winbond Electronics Corp> at usbus0 > ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev > 1.10/0.01, addr 3> on usbus0 > ums0: 3 buttons and [Z] coordinates ID=0 > ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev > 1.10/0.01, addr 3> on usbus0 > kbd2 at ukbd0 > Trying to mount root from ufs:/dev/ada0p2 [rw]... > > regards, > Johan Hendriks > > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"