On 10/06/2015 10:18, Sean Kelly wrote: > Back in May, I posted about issues I was having with a Dell PE R630 with > 4x800GB NVMe SSDs. I would get kernel panics due to the inability to assign > all the interrupts because of > https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=199321 > <https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=199321>. Jim Harris helped > fix this issue so I bought several more of these servers, Including ones with > 4x1.6TB drives… > > while the new servers with 4x800GB drives still work, the ones with 4x1.6TB > drives do not. When I do a > zpool create tank mirror nvd0 nvd1 mirror nvd2 nvd3 > the command never returns and the kernel logs: > nvme0: resetting controller > nvme0: controller ready did not become 0 within 2000 ms > > I’ve tried several different things trying to understand where the actual > problem is. > WORKS: dd if=/dev/nvd0 of=/dev/null bs=1m > WORKS: dd if=/dev/zero of=/dev/nvd0 bs=1m > WORKS: newfs /dev/nvd0 > FAILS: zpool create tank mirror nvd[01] > FAILS: gpart add -t freebsd-zfs nvd[01] && zpool create tank mirror nvd[01]p1 > FAILS: gpart add -t freebsd-zfs -s 1400g nvd[01[ && zpool create tank > nvd[01]p1 > WORKS: gpart add -t freebsd-zfs -s 800g nvd[01] && zpool create tank nvd[01]p1 > > NOTE: The above commands are more about getting the point across, not > validity. I wiped the disk clean between gpart attempts and used GPT. > > So it seems like zpool works if I don’t cross past ~800GB. But other things > like dd and newfs work. > > When I get the kernel messages about the controller resetting and then not > responding, the NVMe subsystem hangs entirely. Since my boot disks are not > NVMe, the system continues to work but no more NVMe stuff can be done. > Further, attempting to reboot hangs and I have to do a power cycle. > > Any thoughts on what the deal may be here? > > 10.2-RELEASE-p5 > > nvme0@pci0:132:0:0: class=0x010802 card=0x1f971028 chip=0xa820144d > rev=0x03 hdr=0x00 > vendor = 'Samsung Electronics Co Ltd' > class = mass storage > subclass = NVM
Try this: sysctl vfs.zfs.vdev.trim_on_init=0 zpool create tank mirror nvd[01] Eric _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"