> > I thought it was the physical card, but I have swapped this out
> > for a completely different one and the problems remain.
>
> What does pciconf -lvb display for the PCI IDs for this card ?
I have just dropped a third card into the machine 9I need
to get some work done unfortnately) - for this the output is
em0@pci0:3:2:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82541PI Gigabit Ethernet Controller'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfebc0000, size 131072, enabled
bar [14] = type Memory, range 32, base 0xfeba0000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0xe400, size 64, enabled
I will let you know if it locks up, or if it doesnt -I swapped
PCI slots as well in case this is actually a hardware issue.
> If you use r303832, this is CURRENT (12.x) ? Then maybe the
> question should be discussed on [email protected].
Its 10.3-STABLE according to uname -a
-pete.
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
