> On 9 August 2016, at 04:40, Kurt Jaeger <li...@opsec.eu> wrote:
>
> Hi!
>
>> I upgraded my local machine to the above revision a few days ago. Since then
>> I have seen the local em0 card locking up and getting he following
>> messages in dmesg
>>
>> em0: Watchdog timeout -- resetting
>> em0: link state changed to DOWN
>> em0: link state changed to UP
>>
>>
>> I thought it was the physical card, but I have swapped this out
>> for a completely different one and the problems remain.
>
> What does pciconf -lvb display for the PCI IDs for this card ?
>
> If you use r303832, this is CURRENT (12.x) ? Then maybe the
> question should be discussed on curr...@freebsd.org.
I am seeing this on 11.0-BETA3/4.
bge0@pci0:3:0:0: class=0x020000 card=0x168614e4 chip=0x168614e4 rev=0x01
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM57766 Gigabit Ethernet PCIe'
class = network
subclass = ethernet
bar [10] = type Prefetchable Memory, range 64, base 0xa0700000, size
65536, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xa0710000, size
65536, enabled
It does not occur on another machine with:
bge0@pci0:2:0:0: class=0x020000 card=0x16b414e4 chip=0x16b414e4 rev=0x10
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM57765 Gigabit Ethernet PCIe'
class = network
subclass = ethernet
bar [10] = type Prefetchable Memory, range 64, base 0x90400000, size
65536, enabled
bar [18] = type Prefetchable Memory, range 64, base 0x90410000, size
65536, enabled
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
