On Sun, Feb 28, 2021 at 8:26 PM Carl Johnson <ca...@peak.org> wrote: > I have an 8GB RPi 4B that I am trying out, but it has no USB response at > all. That means that I can't use a keyboard or mouse, but I can use a > serial console and ethernet. I can plug any USB device into any port, > but there is nothing logged in /var/messages. Running usbconfig as root > just reports 'No device match or lack of permissions'. Running > 'dmesg | grep -i usb' reports only the following lines: > > usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 > bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 81 at > device 0.0 on pci2 > usb_needs_explore_all: no devclass > > Running 'pciconf -lv' shows there is a VL805 USB controller present. I > tested this with Linux and everything worked properly. This is a new > computer that I bought only a couple of weeks ago. Does anybody have > any ideas on what this might be, or what I could do to try to figure it > out? > > Thanks in advance for any ideas. > -- > Carl Johnson ca...@peak.org > > _______________________________________________ >
You did not mention which FreeBSD you are using ( please use "uname -a" ) . Personally , I do not know anything about Raspberry Pi with FreeBSD , but , without knowing which FreeBSD you are using , it is very likely that no one will be able to give you any information . Mehmet Erol Sanliturk _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"