I have some Supermicro P8SCT based systems I would like to run 6.2 on, unfortunately something between 6.1 and 6.2 has broken bge on this board.
This board has 2 bge's and the first one is on before the BIOS hands off to the OS (I can see the activity light flash) but when the kernel attaches the light stops flashing. An ifconfig says 'no carrier'. bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xd1000000-0xd100ffff irq 16 at device 0.0 on pci3 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:30:48:89:be:5c pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci4: <ACPI PCI bus> on pcib4 bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xd1100000-0xd110ffff irq 17 at device 0.0 on pci4 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:30:48:89:be:5d From pciconf.. [EMAIL PROTECTED]:0:0: class=0x020000 card=0x02c615d9 chip=0x165914e4 rev=0x11 hdr=0x00 [EMAIL PROTECTED]:0:0: class=0x020000 card=0x02c615d9 chip=0x165914e4 rev=0x11 hdr=0x00 This system was updated using CVS so it's really 6.2-PRERELEASE, I am about to try updating again to RELENG_6 and seeing if I was perhaps out of sync. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
pgpLOIHsAga7u.pgp
Description: PGP signature