On Mon, Dec 17, 2007 at 12:50:07PM +0100, Marian Hettwer wrote: > marian46-23# stty -a -f /dev/ttyd0 > speed 9600 baud; 0 rows; 0 columns; > lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl > -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo > -extproc > iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk > brkint -inpck -ignpar -parmrk > oflags: opost onlcr -ocrnl -oxtabs -onocr -onlret > cflags: cread cs8 -parenb -parodd hupcl clocal -cstopb -crtscts -dsrflow > -dtrflow -mdmbuf > cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>; > eol2 = <undef>; erase = ^?; erase2 = ^H; intr = ^C; kill = ^U; > lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q; > status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W; > > hm...
Identical to ours... Well, the reason you'd get boot messages and kernel output would be that neither of those (AFIAK) bothers to check for things like DTR/DSR and DCD. getty, on the other hand, does. That's what makes me think it might be a cabling or adapter issue. The 3wire.9600 test, I assume, should've worked though... > It's really really strange that I can see the whole boot process but don't > have a login prompt in the end. strange. Has this box been "upgraded" from RELENG_6 or anything like that? I remember encountering a situation with one of our RELENG_6 boxes where serial console would work fine up until the point of getting a login prompt via getty, which never worked. Rebuilding kernel + world fixed the problem (time delta between kernel/world builds was over 100 days, and during that time I'm sure there were serial console changes). -- | Jeremy Chadwick jdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
