Hi Ho,
Jeremy Chadwick schrieb:
On Mon, Dec 17, 2007 at 12:50:07PM +0100, Marian Hettwer wrote:
marian46-23# stty -a -f /dev/ttyd0
speed 9600 baud; 0 rows; 0 columns;
lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl
-echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo
-extproc
iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk
brkint -inpck -ignpar -parmrk
oflags: opost onlcr -ocrnl -oxtabs -onocr -onlret
cflags: cread cs8 -parenb -parodd hupcl clocal -cstopb -crtscts -dsrflow
-dtrflow -mdmbuf
cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
eol2 = <undef>; erase = ^?; erase2 = ^H; intr = ^C; kill = ^U;
lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q;
status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W;
hm...
Identical to ours...
Well, the reason you'd get boot messages and kernel output would be that
neither of those (AFIAK) bothers to check for things like DTR/DSR and
DCD. getty, on the other hand, does. That's what makes me think it
might be a cabling or adapter issue. The 3wire.9600 test, I assume,
should've worked though...
Well, I enabled the 2wirte.9600 test via "kill -HUP 1". And according to
my processlist, getty was running with 3wire.9600. I could try to
reboot, although this should make a difference at all.
It's really really strange that I can see the whole boot process but don't
have a login prompt in the end. strange.
Has this box been "upgraded" from RELENG_6 or anything like that? I
remember encountering a situation with one of our RELENG_6 boxes where
serial console would work fine up until the point of getting a login
prompt via getty, which never worked. Rebuilding kernel + world fixed
the problem (time delta between kernel/world builds was over 100 days,
and during that time I'm sure there were serial console changes).
Nope, my installation was built from source via "make buildworld
TARGET_ARCH=amd64", afterwards pxebooted the box and copied my nfsroot
to hard disk and then booted of hard disk. I can't think of a mistake in
that process.
thats really odd. hhmm...
I cvsup today to RELENG_7 and give make buildworld another go.
regards,
Marian
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
