On Tue, 27 May 2008 11:45:19 -0400 Michael Proto <[EMAIL PROTECTED]> wrote about Re: broken re(4):
MP> > Any hints what I should do next to find the culprit? MP> I'm running 6.3 on the exact same Jetway board at home, and while I MP> haven't been bitten by the DOWN/UP issue I have seen the occasional MP> "corrupted MAC on input" error when doing an ssh/scp. Seems to have MP> simmered-down since moving from 6.3-RELEASE to 6.3-STABLE (last MP> supped/rebuilt on 5/6/08). MP> Note this is using only one of the 2 on-board NICs. I disabled the 2nd MP> one in the BIOS as I don't need it at the moment. After my experiences with the patch Pyun provided is seems to me that running one or two nics makes somehow a difference. I am still wondering why I have two boards with the same hardware that work flawlessly. However, when comparing all things, I found some minor differences: The working boards are some months older and their CPU shows up like this: CPU: VIA C7 Esther+RNG+AES+AES-CTR+SHA1+SHA256+RSA (1500.01-MHz 686-class CPU) Origin = "CentaurHauls" Id = 0x6a9 Stepping = 9 Features=0xa7c9baff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> Features2=0x181<SSE3,EST,TM2> The one that doesn't work is newer and dmesg identifies: CPU: VIA C7 Processor 1500MHz (1500.01-MHz 686-class CPU) Origin = "CentaurHauls" Id = 0x6d0 Stepping = 0 Features=0xa7c9baff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> Features2=0x4181<SSE3,EST,TM2,xTPR> VIA Padlock Features=0xffcc<RNG,AES,AES-CTR,SHA1,SHA256,RSA> This is the only difference I can make out so far. Which board do you exactly have? cu Gerrit _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
