Hi,
i have ACS ACR38T Smart card reader/write device (idVendor=0x072f,
idProduct=0x90cc), which is an USB stick. I try to make it to work under
FreeBSD (trys have been done on 5.4, 5.5 and 6.2).
The device has 3 endpoints -- interrupt-in, configured as /dev/ugenX.1
and bulk-in/bulk-out, configured as /dev/ugenX.2.
Neither the driver from openct-0.6.14 port nor the driver from
ccid-1.3.5 port work for the device.
The communication with the device gets stuck on BULK-OUT operations.
write(2) calls to /dev/ugenX.2 hang forever despite the timeout set with
USB_SET_TIMEOUT.
The device has been tested to work under Windoze, so as general, it's
not broken, but just irresponsive.
Could someone give me some clues about the nature of the problem ?
Thanks in advance!
Vladimir
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
