Marcin Cieslak wrote:
It maybe a good idea to add 0xFFF to the usbdevs.
Does the "umass" driver attach to the 0xFFF device? I would recommend
adding this as a quirk to umass.c then.
There are patches attached (ubsa.c_patch, umass_c.patch, usbdevs.patch)
I am using to kill the "zeroconf" CD on the UMTS. They do not always
work - i.e. umass_attach does not wait until the device is really
detached. But setting USB_DEBUG helps :-)
Since your patches deals with Option cards I'll just let you know that
all(?) Option based devices can be switched perfectly safe from
user land, without patching ubsa, using camcontrol.
The command to switch Option devices is a SCSI REZERO command.
This should be enough to switch the device, given that pass0
is the modem (use camcontrol devlist)
camcontrol cmd pass0 -c “01 00 00 00 00 00″ -i 1 i1
camcontrol might give you an error but the device will be switched.
Note that this is ONLY for Option based devices, I don't know about
the Sierra ones but the linux usb_modeswitch tool might be a good start.
Fredrik
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
