With sys/dev/usb, I'm able to kldload uscanner and xsane just works.
With usb2, I klduscanner, and it doesn't. There's no /dev/uscanner0
in the ls listing, but one can open that file directly. trussing
sane-find-scanners yields:
...
open("/dev/",O_NONBLOCK,020222513) = 4 (0x4)
fstat(4,{ mode=dr-xr-xr-x ,inode=2,size=512,blksize=4096 }) = 0 (0x0)
fcntl(4,F_SETFD,FD_CLOEXEC) = 0 (0x0)
fstatfs(0x4,0x7fffffffda80,0x0,0x0,0x60,0x801200110) = 0 (0x0)
getdirentries(0x4,0x80120c000,0x1000,0x80120a0a8,0x30,0x801200158) = 1516
(0x5ec)
getdirentries(0x4,0x80120c000,0x1000,0x80120a0a8,0xffffffff8064d180,0x7fffffffdd18)
= 0 (0x0)
lseek(4,0x0,SEEK_SET) = 0 (0x0)
close(4) = 0 (0x0)
open("/dev/usb0",O_RDWR,00) ERR#6 'Device not configured'
open("/dev/usb1",O_RDWR,00) ERR#6 'Device not configured'
open("/dev/usb2",O_RDWR,00) ERR#6 'Device not configured'
open("/dev/usb3",O_RDWR,00) ERR#6 'Device not configured'
open("/dev/usb4",O_RDWR,00) ERR#6 'Device not configured'
open("/dev/usb5",O_RDWR,00) ERR#6 'Device not configured'
open("/dev/usb6",O_RDWR,00) ERR#6 'Device not configured'
open("/dev/usb7",O_RDWR,00) ERR#6 'Device not configured'
open("/dev/usb8",O_RDWR,00) ERR#6 'Device not configured'
open("/dev/usb9",O_RDWR,00) ERR#6 'Device not configured'
write(1," # No USB scanners found. If yo"...,79) = 79 (0x4f)
...
Is there a fix for this?
Warner
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[email protected]"
