On Tuesday 06 January 2009, M. Warner Losh wrote: > In message: <[email protected]> > > Hans Petter Selasky <[email protected]> writes: > : On Tuesday 06 January 2009, M. Warner Losh wrote: > : > In message: <[email protected]> > : > > : > Hans Petter Selasky <[email protected]> writes: > : > : On Tuesday 06 January 2009, M. Warner Losh wrote: > : > : > With sys/dev/usb, I'm able to kldload uscanner and xsane just > : > : > works. With usb2, I klduscanner, and it doesn't. There's no > : > : > /dev/uscanner0 in the ls listing, but one can open that file > : > : > directly. trussing sane-find-scanners yields: > : > : > > : > : > ... > : > : > open("/dev/",O_NONBLOCK,020222513) = 4 (0x4) > : > : > fstat(4,{ mode=dr-xr-xr-x ,inode=2,size=512,blksize=4096 }) = 0 > : > : > (0x0) fcntl(4,F_SETFD,FD_CLOEXEC) = 0 (0x0) > : > : > fstatfs(0x4,0x7fffffffda80,0x0,0x0,0x60,0x801200110) = 0 (0x0) > : > : > getdirentries(0x4,0x80120c000,0x1000,0x80120a0a8,0x30,0x801200158) > : > : > = 1516 (0x5ec) > : > : > getdirentries(0x4,0x80120c000,0x1000,0x80120a0a8,0xffffffff8064d180 > : > : >,0x7 ffff fffdd18) = 0 (0x0) lseek(4,0x0,SEEK_SET) > = 0 (0x0) > : > : > close(4) = 0 (0x0) > : > : > open("/dev/usb0",O_RDWR,00) ERR#6 'Device not > configured' > : > : > open("/dev/usb1",O_RDWR,00) ERR#6 'Device not > configured' > : > : > open("/dev/usb2",O_RDWR,00) ERR#6 'Device not > configured' > : > : > open("/dev/usb3",O_RDWR,00) ERR#6 'Device not > configured' > : > : > open("/dev/usb4",O_RDWR,00) ERR#6 'Device not > configured' > : > : > open("/dev/usb5",O_RDWR,00) ERR#6 'Device not > configured' > : > : > open("/dev/usb6",O_RDWR,00) ERR#6 'Device not > configured' > : > : > open("/dev/usb7",O_RDWR,00) ERR#6 'Device not > configured' > : > : > open("/dev/usb8",O_RDWR,00) ERR#6 'Device not > configured' > : > : > open("/dev/usb9",O_RDWR,00) ERR#6 'Device not > configured' > : > : > write(1," # No USB scanners found. If yo"...,79) = 79 (0x4f) > : > : > ... > : > : > > : > : > Is there a fix for this? > : > : > : > : Hi, > : > : > : > : I looks like xsane is linked with libusb-0.1 . Try re-linking xsane > : > : with libusb20. Then everything should work. > : > : FYI: libusb20 in FreeBSD is binary compatible with libusb-0.1 > > I built all these things with ports, will just updating the ports fix > them, or will I need to jump through some weird hoops? > > Warner
Hi! You can do something like this (takes 2-seconds): lrwxr-xr-x 1 root wheel 22 Oct 23 18:13 /usr/local/lib/libusb-0.1.so.8 -> /usr/lib/libusb20.so.1 lrwxr-xr-x 1 root wheel 19 Oct 23 18:14 /usr/local/lib/libusb.a -> /usr/lib/libusb20.a Others have suggested doing this using libmap.conf. --HPS _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
