>Number: 130230 >Category: usb >Synopsis: Samsung Electronics YP-U3 does not attach in 7.1-RELEASE >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Jan 06 14:10:00 UTC 2009 >Closed-Date: >Last-Modified: >Originator: Boris Kochergin >Release: 7.1-RELEASE >Organization: Polytechnic Institute of NYU >Environment: FreeBSD peer 7.1-RELEASE FreeBSD 7.1-RELEASE #0: Sat Jan 3 20:49:25 EST 2009 r...@peer:/usr/obj/usr/src/sys/PEER i386 >Description: In FreeBSD 7.0, I used the patch submitted with kern/125398 to get the device to work. I notice that the quirk has been added to scsi_da.c in 7.1, but the device no longer attaches:
umass0: <Samsung Electronics YP-U3, class 0/0, rev 2.00/2.20, addr 2> on uhub4 (da0:umass-sim0:0:0:0): got CAM status 0x4 (da0:umass-sim0:0:0:0): fatal error, failed to attach to device (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry A random USB flash drive I tried to make sure it wasn't a more general problem worked (I was able to mount it and everything): umass0: <USBest Technology USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on uhub4 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Ut163 USB2FlashStorage 0.00> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 963MB (1974271 512 byte sectors: 64H 32S/T 963C) >How-To-Repeat: Plug a Samsung Electronics YP-U3 into a 7.1-RELEASE machine >Fix: >Release-Note: >Audit-Trail: >Unformatted: _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
