alright. i've tried various patches and cups drivers. the only combination that slightly works is a kernel with both patchsets in combination with the splix2 driver. alls other combinations of patches and drivers fail without a page being printed and causing the printer to signal an error.
with the two patchsets and the splix2 driver i'm able to print about 5% of the testpage. the paper is almost completely empty. only a a little bit of the testpage is being printed onto the top of the page. after ejecting the page the printer signals an error. with the usb1-stack the whole testpage get's printed and the printer stays operational afterwards. also the gdi driver works just like the splix2 driver without any problems. using the usb2-stack the gdi driver causes the printer to signal an error without anything being printed. alex Hans Petter Selasky schrieb am 2009-03-15: > Hi, > I have been able to reproduce the issue over here on an USB printer. > Try this > patch in addition to the previous ones: > http://perforce.freebsd.org/chv.cgi?CH=159241 > --HPS _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
