On Sun, Aug 02, 2009 at 10:15:23PM +0200, Marc Fonvieille wrote: > Attach for real the patch >
Sorry, I dunno why attachement is not working today, here's the patch: Index: uvisor.c =================================================================== --- uvisor.c (revision 196038) +++ uvisor.c (working copy) @@ -95,7 +95,8 @@ #define UVISOR_CONFIG_INDEX 0 #define UVISOR_IFACE_INDEX 0 -#define UVISOR_BUFSIZE 1024 /* bytes */ +#define UVISORIBUFSIZE 64 /* bytes */ +#define UVISOROBUFSIZE 32 /* bytes */ /* From the Linux driver */ /* @@ -208,7 +209,7 @@ .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, - .bufsize = UVISOR_BUFSIZE, /* bytes */ + .bufsize = UVISOROBUFSIZE, /* bytes */ .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, .callback = &uvisor_write_callback, }, @@ -217,7 +218,7 @@ .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, - .bufsize = UVISOR_BUFSIZE, /* bytes */ + .bufsize = UVISORIBUFSIZE, /* bytes */ .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, .callback = &uvisor_read_callback, }, @@ -375,7 +376,7 @@ struct uvisor_connection_info coninfo; struct uvisor_palm_connection_info pconinfo; uint16_t actlen; - uWord wAvail; +/* uWord wAvail;*/ uint8_t buffer[256]; if (sc->sc_flag & UVISOR_FLAG_VISOR) { @@ -497,7 +498,7 @@ } } DPRINTF("getting available bytes\n"); - req.bmRequestType = UT_READ_VENDOR_ENDPOINT; +/* req.bmRequestType = UT_READ_VENDOR_ENDPOINT; req.bRequest = UVISOR_REQUEST_BYTES_AVAILABLE; USETW(req.wValue, 0); USETW(req.wIndex, 5); @@ -506,7 +507,7 @@ if (err) { goto done; } - DPRINTF("avail=%d\n", UGETW(wAvail)); + DPRINTF("avail=%d\n", UGETW(wAvail));*/ DPRINTF("done\n"); done: @@ -586,7 +587,7 @@ tr_setup: pc = usbd_xfer_get_frame(xfer, 0); if (ucom_get_data(&sc->sc_ucom, pc, 0, - UVISOR_BUFSIZE, &actlen)) { + UVISOROBUFSIZE, &actlen)) { usbd_xfer_set_frame_len(xfer, 0, actlen); usbd_transfer_submit(xfer); -- Marc _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"