On Monday 03 August 2009 08:41:17 c-s wrote: > >Number: 137377 > >Category: usb > >Synopsis: Support for Huawei E180 > >Confidential: no > >Severity: non-critical > >Priority: low > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: change-request > >Submitter-Id: current-users > >Arrival-Date: Mon Aug 03 06:50:01 UTC 2009 > >Closed-Date: > >Last-Modified: > >Originator: c-s > >Release: Current > >Organization: > >Environment: > > FreeBSD c-s.li 8.0-BETA2 FreeBSD 8.0-BETA2 #3: Sat Aug 1 09:26:55 CEST > 2009 r...@c-st.net:/usr/obj/usr/src/sys/GENERIC amd64 > > >Description: > > Attaching a Huawei E180 3G USB modem yields the following message: > > ==================== > Aug 3 08:26:06 c-st root: Unknown USB device: vendor 0x12d1 product 0x1003 > bus uhub2 Aug 3 08:26:06 c-st kernel: ugen2.5: <HUAWEI Technology> at > usbus2 Aug 3 08:26:06 c-st kernel: umass0: <HUAWEI Technology HUAWEI > Mobile, class 0/0, rev 2.00/0.00, addr 5> on usbus2 Aug 3 08:26:06 c-st > kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000 Aug 3 08:26:07 c-st > root: Unknown USB device: vendor 0x12d1 product 0x1003 bus uhub2 Aug 3 > 08:26:07 c-st kernel: umass0:1:0:-1: Attached to scbus1 > Aug 3 08:26:07 c-st kernel: umass1: <HUAWEI Technology HUAWEI Mobile, > class 0/0, rev 2.00/0.00, addr 5> on usbus2 Aug 3 08:26:07 c-st kernel: > umass1: SCSI over Bulk-Only; quirks = 0x0000 Aug 3 08:26:08 c-st kernel: > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 Aug 3 > 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status > Error Aug 3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0): SCSI Status: > Check Condition Aug 3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0): NOT > READY asc:3a,0 Aug 3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0): > Medium not present Aug 3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0): > Unretryable error Aug 3 08:26:08 c-st kernel: cd0 at umass-sim0 bus 0 > target 0 lun 0 ==================== > > Note that this device is not (!) the same as the already patched Huawei > E180v. >
Please provide output from: usbconfig -u XXX -a YYY dump_device_desc dump_curr_config_desc Where XXX and YYY are the numbers after ugen. --HPS _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
