The following reply was made to PR usb/137377; it has been noted by GNATS.

From: Hans Petter Selasky <hsela...@c2i.net>
To: freebsd-usb@freebsd.org
Cc: "c-s" <c...@c-s.li>,
 freebsd-gnats-sub...@freebsd.org
Subject: Re: usb/137377: Support for Huawei E180
Date: Mon, 3 Aug 2009 13:38:56 +0200

 On Monday 03 August 2009 08:41:17 c-s wrote:
 > >Number:         137377
 > >Category:       usb
 > >Synopsis:       Support for Huawei E180
 > >Confidential:   no
 > >Severity:       non-critical
 > >Priority:       low
 > >Responsible:    freebsd-usb
 > >State:          open
 > >Quarter:
 > >Keywords:
 > >Date-Required:
 > >Class:          change-request
 > >Submitter-Id:   current-users
 > >Arrival-Date:   Mon Aug 03 06:50:01 UTC 2009
 > >Closed-Date:
 > >Last-Modified:
 > >Originator:     c-s
 > >Release:        Current
 > >Organization:
 > >Environment:
 >
 > FreeBSD c-s.li 8.0-BETA2 FreeBSD 8.0-BETA2 #3: Sat Aug  1 09:26:55 CEST
 > 2009     r...@c-st.net:/usr/obj/usr/src/sys/GENERIC  amd64
 >
 > >Description:
 >
 > Attaching a Huawei E180 3G USB modem yields the following message:
 >
 > ====================
 > Aug  3 08:26:06 c-st root: Unknown USB device: vendor 0x12d1 product 0x1003
 > bus uhub2 Aug  3 08:26:06 c-st kernel: ugen2.5: <HUAWEI Technology> at
 > usbus2 Aug  3 08:26:06 c-st kernel: umass0: <HUAWEI Technology HUAWEI
 > Mobile, class 0/0, rev 2.00/0.00, addr 5> on usbus2 Aug  3 08:26:06 c-st
 > kernel: umass0:  SCSI over Bulk-Only; quirks = 0x0000 Aug  3 08:26:07 c-st
 > root: Unknown USB device: vendor 0x12d1 product 0x1003 bus uhub2 Aug  3
 > 08:26:07 c-st kernel: umass0:1:0:-1: Attached to scbus1
 > Aug  3 08:26:07 c-st kernel: umass1: <HUAWEI Technology HUAWEI Mobile,
 > class 0/0, rev 2.00/0.00, addr 5> on usbus2 Aug  3 08:26:07 c-st kernel:
 > umass1:  SCSI over Bulk-Only; quirks = 0x0000 Aug  3 08:26:08 c-st kernel:
 > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 Aug  3
 > 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status
 > Error Aug  3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0): SCSI Status:
 > Check Condition Aug  3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0): NOT
 > READY asc:3a,0 Aug  3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0):
 > Medium not present Aug  3 08:26:08 c-st kernel: (probe0:umass-sim0:0:0:0):
 > Unretryable error Aug  3 08:26:08 c-st kernel: cd0 at umass-sim0 bus 0
 > target 0 lun 0 ====================
 >
 > Note that this device is not (!) the same as the already patched Huawei
 > E180v.
 >
 
 Please provide output from:
 
 usbconfig -u XXX -a YYY dump_device_desc dump_curr_config_desc
 
 Where XXX and YYY are the numbers after ugen.
 
 --HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to