Hi, Can you send me the patch.
Seems like the list software stripped it off. --HPS On Wednesday 16 September 2009 20:52:56 Pyun YongHyeon wrote: > Hi, > > Traditionally axe(4) didn't support reprogramming station address > (node id) as datasheet does not mention the required command. > However AX88178 datasheet has the command and it seems the command > works as expected. I've attached patch which will enable changing > ethernet address of the controller for AX88178/AX88772/AX88172. > I couldn't test it on AX88772 and AX88172 controller. So if you > have these controllers would you give it try let me know how it > goes on your controller? > > <testing> > Check the ethernet address and change it to other address with > ifconfig(8). The following command will change the ethernet address > to aa:bb:cc:dd:ee:ff. > #ifconfig ue0 down > #ifconfig ue0 ether aa:bb:cc:dd:ee:ff > #ifconfig ue0 up > After that check whether you can still use network. > > Hans, would you review the patch? _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"