On Saturday 06 November 2010 17:48:41 Michael Martin wrote: > On 11/06/2010 10:26, Hans Petter Selasky wrote: > > On Saturday 06 November 2010 17:00:46 Michael Martin wrote: > >> On 11/06/2010 03:31, Hans Petter Selasky wrote: > >>> Hi, > >>> > >>> Can you revert the last patch I sent an apply the attached one? > >>> > >>> Then repeat the testing like last time. > >>> > >>> --HPS > >> > >> Here are the results: > >> http://appliedtechnicalknowledge.com/freebsd/usb_30_hub_patch/ > >> > >> I used one drive/port for the testing. da0 not recognized on first > >> boot, but came up after an unplug cable/plug cable. > > > > Hi, > > > > I will have a closer look into this tomorrow. Does your device work when > > first recognized? What read/write speeds do you get? > > > > --HPS > > The device doesn't work when I try to import the zfs pool on the drive. > The drive shows up in camcontrol ok. I initially exported the zfs file > system to avoid attempts to mount it on boot. Once da0 is recognized by > the kernel and camcontrol devlist shows it, I try a zpool import on the > file system. The zpool import command hangs--sometimes the entire > computer locks up, and I hard reboot the computer. I captured the usb > logs during the zpool import for you there which captures some zfs i/o > errors.
Hi, I'm not sure what exacatly the issue is about. Maybe the hardware is incompatible. Is is possible that I could be given SSH and root access to this hardware setup for a limited time to debug this issue? --HPS _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
