I'm a bit at a loss to debug this, so any help would be appreciated. My camera used to connect to FreeBSD -CURRENT until summer or so, but now doesn't get detected as a CAM device (I've also seen this with a Sony memory stick). When I attach it, I get:

ugen6.2: <NIKON> at usbus6
umass0: <NIKON NIKON DSC D50, class 0/0, rev 2.00/1.00, addr 2> on usbus6

but no daX line.

Here's some more info from usbconfig, though probably of dubious utility.

# usbconfig -u 6 -a 2 dump_device_desc
ugen6.2: <NIKON DSC D50 NIKON> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x04b0
  idProduct = 0x0409
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <NIKON>
  iProduct = 0x0002  <NIKON DSC D50>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001

Any ideas where to look further or things to try? My kernel is FreeBSD 10.0-CURRENT #17 r231915 on amd64.
freebsd-usb@freebsd.org mailing list
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to