Dear Warren thank you for your help, following your mail I found an additional strange behavior of my system, when I use cu, two processes are spawned at the same time: (ps aux output)
seaman 80719 0.0 0.0 10048 1372 4 S+ 3:35PM 0:00.00 cu -t -eo -l /dev/cuaU0 -s 19200 seaman 80720 0.0 0.0 10048 1360 4 S+ 3:35PM 0:00.00 cu -t -eo -l /dev/cuaU0 -s 19200 on the console shell where cu lives I see: seaman@bluehouse:~$ cu -t -eo -l /dev/cuaU0 -s 19200 can't open log file /var/log/aculog. Connected [Now I Hit ENTER] write: Device not configured Now the communication hold and I can't do nothing anymore, hitting Enter or rebooting the remote device to see the bootstrap output doesn't work. I need to get out with ENTER~. And I get [EOT] about my environment: * cat /etc/devfs.rules [localrules=10] add path 'ugen*' mode 0660 group operator add path 'usb/*' mode 0660 group operator * cat /etc/rc.conf hostname="bluehouse" ifconfig_em0="DHCP" powerd_enable="YES" # Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable dumpdev="NO" wlans_wpi0="wlan0" ifconfig_wlan0="WPA DHCP" background_dhclient="YES" moused_enable="NO" moused_nondefault_enable="NO" hald_enable="NO" linux_enable="YES" dbus_enable="YES" zfs_enable="YES" ntpd_enable="YES" #bitlbee_enable="YES" gateway_enable="YES" pf_enable="YES" pf_rules="/etc/pf.conf" pf_program="/sbin/pfctl" pflog_enable="NO" pflog_logfile="/var/log/pflog" pflog_program="/sbin/pflogd" fusefs_enable="NO" devd_enable="YES" devfs_system_ruleset="localrules" * cat /boot/loader.conf if_wpi_load="YES" nvidia_load="YES" wlan_wep_load="YES" wlan_ccmp_load="YES" wlan_tkip_load="YES" Thank you for your help f. On Tue, Mar 20, 2012 at 15:23, Warren Block <wbl...@wonkity.com> wrote: > On Sun, 18 Mar 2012, Warren Block wrote: > >> On Sun, 18 Mar 2012, Fabio Dive wrote: >> >>> Hello people! >>> >>> I write you because I have got a problem with the uplcom driver >>> on FreeBSD 9.0, I tried a lot of different things, read all I found, >>> manpages, forums, irc, google but still not able to solve my problem. >>> >>> I need to connect to my remote Alix board, >>> the remote console setup is 19200 8N1. >>> I am using a short USB Prolific Tec.. serial cable adapter with a >>> NULL modem cable, the last one plugged one side to the Alix board, >>> the other side to the adapter cable. >>> >>> Under Linux Debian everything is fine, so the hardware and cables >>> should be ok, under Linux I used minicom and cu and tip without problems. >>> With FreeBSD and NetBSD, big problems..the result is always >>> the same, I can receive but I cannot transmit. >>> >>> (working as root) >>> *cu -t -s 19200 -l /dev/cuaU0 >>> write: Device not configured >>> (I can't transmit but I can receive the output if I reboot the remote >>> alix board) >> >> >> Add the user to the dialer group. If that doesn't do it, make sure the >> user has write permission to the USB device and /dev/cuaU0. > > > Managed to locate my PL2303 cable, and it works on 9-stable amd64 built > yesterday: > > % cu -l /dev/cuaU0 -s 19200 > can't open log file /var/log/aculog. > Connected > AT > OK > ~ > [EOT] > > I typed the "AT". If the USB cable is disconnected and reconnected while cu > still has it open, typing a character produces > > write: Device not configured > > because the device disappeared when the USB cable was unplugged. The send > and receive LEDs on this modem also both go on, meaning some data is being > continuously sent and echoed. > > /etc/devfs.rules (just the USB ones) > > [localrules=10] > add path 'ugen*' mode 0660 group operator > add path 'usb/*' mode 0660 group operator > > The user is a member of both dialer and operator groups. > > If it still does not work for you, check loader.conf and rc.conf for > nonstandard settings. _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"