on 24/03/2012 04:17 Kaho Toshikazu said the following: > Hello, > > I have a similar problem with Transcend 16GB USB flash. When the flash > is plugged, FreeBSD attache it, but reports very big capacity and can > not read/write it. UQ_MSC_NO_INQUIRY makes jobs in my machines. > 10-current and 8-stable have same problem, and 9-stable is not tested.
Could the problem be related to r229288 (r232943 in stable/9)? The dates below match the MFC date 2012-03-13. > To: freebsd-usb@freebsd.org > Subject: Re: USB Flash drive problem with 9.0 > From: Hans Petter Selasky <hsela...@c2i.net> > Date: Fri, 23 Mar 2012 08:25:32 +0100 > Cc: Alexander Motin <m...@freebsd.org>, freebsd-curr...@freebsd.org, "J.J. > Day" <day1...@hotmail.com> > > On Friday 23 March 2012 06:14:08 J.J. Day wrote: >> I am upgrading a FreeBSD server and have encountered a problem with >> mounting a USB flash drive. The system was on 6.3 and I upgraded to 9.0 >> using CVS repositories. The flash drive worked properly at all steps >> throughout the upgrade. However, after the OS upgrade was complete, I >> made a mistake and destroyed some of the server application. >> >> So, I set the >> upgraded drive aside, copied the original source drive to a different >> spare, and repeated the upgrade process taking care to verify the >> functioning of the applications during the process. When I finished the >> second time, everything worked properly except for mounting the flash >> drive. >> >> it appears that something changed with the OS code that reads the drive >> firmware between the first time I ran cvsup on (about) the 9th and the >> second time I ran it about the 18th. >> >> >> >> This is the output from the first upgrade (3/11/2012) when the drive is >> inserted: >> >> >> >> ugen4.2: <HP> at usbus4 >> umass0: <HP v165w, class 0/0, rev 2.00/32.76, addr 2> on usbus4 >> umass0: SCSI over Bulk-Only; quirks = 0x0100 >> umass0:2:0:-1: Attached to scbus2 >> da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 >> da0: <hp v165w 3276> Removable Direct Access SCSI-4 device >> da0: 40.000MB/s transfers >> da0: 30960MB (63406080 512 byte sectors: 255H 63S/T 3946C) >> And diskinfo output: >> >> >> >> da0 >> 512 # sectorsize >> 32463912960 # mediasize in bytes (30G) >> 63406080 # mediasize in sectors >> 0 # stripesize >> 0 # stripeoffset >> 3946 # Cylinders according to firmware. >> 255 # Heads according to firmware. >> 63 # Sectors according to firmware. >> AA22064F00000035 # Disk ident. >> This is the output from the second upgrade (3/18/2012) when the drive is >> inserted: >> >> >> >> ugen4.2: <HP> at usbus4 >> umass0: <HP v165w, class 0/0, rev 2.00/32.76, addr 2> on usbus4 >> umass0: SCSI over Bulk-Only; quirks = 0x0100 >> umass0:2:0:-1: Attached to scbus2 >> da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 >> da0: <hp v165w 3276> Removable Direct Access SCSI-4 device >> da0: 40.000MB/s transfers >> da0: 17454747090944MB (71776119061217281 512 byte sectors: 64H 32S/T 0C) >> And diskinfo shows: >> > > Hi, > >> >> da0 >> 512 # sectorsize >> -144115188075855360 # mediasize in bytes () >> -281474976710655 # mediasize in sectors >> 0 # stripesize >> 0 # stripeoffset >> -137438953471 # Cylinders according to firmware. >> 64 # Heads according to firmware. >> 32 # Sectors according to firmware. >> AA22064F00000035 # Disk ident. >> Since the size information is incorrect, the /dev/da0s1 device is not >> created and the drive cannot be mounted. The problem only happens with a >> large drive. When I use a 4GB or 8GB drive, everything works correctly. >> >> If there is any information that I can submit that can assist in solving >> the problem please let me know. >> > > This does not look like a USB problem. It is the SCSI/CAM layer which queries > over SCSI USB how big the disk is. > > BTW: > > dec2hex(17454747090944) > ans = FE000000000 > > So it looks like some additional bits have sneaked in there? > > dec2hex(32463912960) > ans = 78F000000 > > 0xFE000000000 / 0x78F000000 > ans = 537.67 > > So it looks like the mediasize was multiplied by 512 when it shouldn't. > > --HPS -- Andriy Gapon _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
